Industrial nonwoven in-line slitter wind

A.Celli Stream In Line – 668

The A.Celli Stream in Line 668 is a complete industrial in-line slitter winder designed for integration into medium- and low-throughput production lines for nonwoven fabrics and composite materials. The machine performs longitudinal web slitting and surface-driven winding of finished rolls. The slitting system uses 12 circular-knife units operating with band counter-knives mounted on a motorized expanding shaft. The configuration includes a motorized S-wrap, a motorized SUS supporting roller, edge-trim extraction, shaft supports, a bar acceleration mechanism and a roll holder. The web is guided through bowed spreader rollers to reduce wrinkles and folds. The machine is equipped with AC drives, a control cabinet, an operator panel, a desktop computer with monitor and industrial communication via Profinet and Ethernet TCP/IP.

Manufacturer: A.Celli Nonwovens S.p.A.
Machine type: Stream in Line
Machine version: 668
Serial number: 2020026
Year of manufacture: 2020
Application: Longitudinal slitting and winding of nonwoven fabrics and composite materials
Winding design: Surface driven
Production speed: 200 m/min
Web threading speed: 10 m/min
Cross-cutting system: Circular knife
Longitudinal slitting system: Band counter-knives on a motorized expanding shaft
Number of slitting units: 12
Edge-trim extraction: Yes
Number of shafts: 4
Shaft diameter: 3″
Drive system: AC motors
Motorized S-wrap: Yes
Motorized SUS supporting roller: Yes
Shaft supports: Yes
Bar acceleration mechanism: Yes
Roll holder: Yes
Drive side: Left
Operator side: Left
Control cabinet side: Left
Operator panel colour: RAL 7035
Control cabinet colour: RAL 7035
Length: 6200 mm
Width: 5550 mm
Height: 3045 mm
Total weight: 16,000 kg
Supply voltage: 400 V
Number of phases: 3
Auxiliary AC voltage: 230 V
DC control voltage: 24 V
Frequency: 50 Hz
Power supply earthing system: TN
Protection rating of power cabinets: IP55
Electrical reference standard: IEC 60204-1
Cable entry into cabinets: From below
PLC communication: Profinet
Field communication: Ethernet TCP/IP
PLC software: TIA Portal
Operator computer: Desktop computer with monitor
Compressed-air pressure: 6 bar
Air consumption during web threading: 4500 Nl/min
Air consumption during normal operation: 700 Nl/min
Air consumption during the change cycle: 2000 Nl/min
Cable routing: In floor ducts
Operating temperature: +15°C to +40°C
Storage temperature: +25°C to +55°C
Relative humidity: Below 80%
Maximum operating altitude: 1000 m
Equivalent continuous sound pressure level LEQ: Below 85 dB
A-weighted sound power level LWA: Below 83 dB
Installed drives: Transmission roller, S-wrap roller, slitting unit, SUS roller, accumulation shaft

The machine comes from an industrial nonwoven production facility and is offered as shown in the photos.
A detailed PDF with the complete technical specification of the machine is available upon request. We will be happy to provide it to seriously interested customers.
Additional photos and further information are also available upon request.

Price: on request / negotiable.

Please contact us for further information.
Dcedpfx Alezudfdo Nen