Conveyor

Altratec Umlaufförderer Stauend (Kette)

Continuous flow conveyor, accumulating type, linking conveyor between 2 stations

-- Unused, from a project that was not realized --

System description ALTRATEC and technical data:

This transfer system is preferably used in series production for material flow management and for loosely linking manual/automatic workstations and manual/automatic work stations using workpiece carriers (WPC).
The workpiece carriers are transported according to the accumulating roller principle. On the sections between the various workstations, the workpiece carriers can be buffered.
In the upper and lower sections, the workpiece carriers can be stopped as required. In the area of the deflection points, the transport takes place with positive engagement.
At the manual workstations or automatic stations, the WPCs are stopped, and if necessary, pre-separated and positioned.
The end workpiece carrier deflection points must be secured against manual intervention in the area of manual workstations by means of protective devices. In the area of automatic handling devices, these are generally secured with the protective device of the handling device.
At the end of the section, the WPCs must be checked for their loading status. Only empty WPCs may be released for circulation into the return section.

Technical data:

- Conveying medium: Accumulating conveyor with accumulating roller chain on both sides,
- Conveying speed: Accumulating conveyor approx. 6 m/min,
- Overall length: Accumulating conveyor approx. 4,400 mm,
- Overall length, including deflection radii: approx. 4,700 mm,
- Overall width: Conveying system without motor approx. 1,200 mm,
- Overall width: Conveying system with motor approx. 1,450 mm,
- Transport height: Top of WPC approx. 950 mm, adjustable by +- 30 mm,
- Support system: ALTRAPROFIL,
- Workpiece carriers (WPC)
Length: Basic workpiece carrier 220 mm,
Width: 1,050 mm,
Number: 17 x on top and 1 x on the bottom,
Weight: Including basic WPC/workpiece holder with holders and component complete, max. 50 kg / per WPC,
- Positioning accuracy: Loading, automatically +/- 0.15 mm on the WPC,
- Positioning accuracy: Unloading, automatically +/- 0.15 mm on the WPC

Electrical equipment
- Motor: Accumulating conveyor 400 V, 50 Hz / SEW with Harting connector,
Prodpfxez Hklfs Ahreb
- ProfiNet
- Sensors for singulator/stopper, WPC query M12 / M18 – IPF electronic, light barriers for workpiece detection
- Electrical and pneumatic installation: On E/A modules ET200, on valve manifold CPV14…

Mechanical equipment:
- 1 piece conveying section, approx. 4,400 mm long, consisting of conveying profiles, including steel supports for accumulating roller chain in ALTRATEC standard design, with automatic and bilateral queried spring tension. Two Vulkollan rollers on the chain tension side – when starting up.
- 4 pieces of heavy-duty supports made of ALTRAPROFIL with adjustable feet, foundation mounting angles without dowels, for a conveying height of approx. 950 mm (top of WPC),
- 6 pieces of stopping station with 2 singulators/stoppers each, lightweight design, arranged in parallel, pneumatically operated, closed and single-acting when not activated. Both positions are queried. Design with integrated backstop in 2 x,
- 1 piece of permanent chain lubrication. Perma Classic with two lubrication points integrated into the longitudinal profiles,
- 10 pieces of WPC queries on the conveying section, 2 pieces of component checks as a light barrier with reflector.

Огласот е автоматски преведен. Можно е да има грешки во преводот.