Приколка со работна платформа

ES-GE Tandem-Anhänger Bordwände, CV, Rungen

You can find our complete vehicle stock with immediately and short-term available vehicles on our website.

Excerpt from the equipment list. Complete specification available upon request.

Chassis:
* Steel welded construction with welded longitudinal beams and perforated Z-cross members
* Tight cross member spacing for high floor load capacity
* Ramp storage between the longitudinal beams behind the axle assembly
* Two insertion pockets for one loading ramp each located below the loading floor, with closing plate in the rear end frame

Front Support:
* Support winch with single-side operation

Drawbar Equipment:
* Height-adjustable rigid drawbar with bolted towing eye approx. 40 mm according to DIN
* Height adjustment +/- 150 mm

Rear Support:
* Two adjustable drop legs

Running Gear:
* 2 x 7 t air suspension axle assembly, make: SAF
* Drum brakes approx. 300 x 150 mm
* Wheel connection 10-hole, center-bolted for single tires
* Total air suspension lift approx. 180 mm, of which lift approx. 150 mm and lower approx. 30 mm
* Control via hand lever with latching function

Tyres:
* 4 x 285/70 R 19.5 – manufacturer at our discretion
* On 8.25 x 19.5 steel rims, manufacturer at our discretion

Splash Protection:
* PVC mudguards in front of and behind the axles
* In accordance with EU regulations with rear mudflaps

Load Securing:
* In the outer frame, a lashing rail for tension belts every approx. 200 mm, lashing force approx. 2.5 t
* 6 pairs of foldable lashing rings evenly distributed, lashing force approx. 8,000 daN
* Stake pockets for insert stakes 80/50
* 3 pairs of stake pockets in the outer frame, evenly distributed
* 4 rows of stake pockets transverse to the loading area, evenly distributed

Brake System:
* Air brake system according to EU regulations with EBS and a red/yellow coupling head each on the connection plate at the drawbar
* As a connection to the towing vehicle, a double-coil with 1 coupling head red/yellow and 1 duomatic coupling
* Spring-actuated parking brake acting on one axle

Floor:
* Approx. 28 mm Z-hardwood floor inlaid in the outer frame
* Wheel arch area with sheet metal covering
* Floor capacity: forklift driveable up to approx. 5 tons

Container Locks:
* Container locks for 1 x 20 ft. container according to ISO 1496, EN 284 or EN 452-1
* Additional container locks for 1 x 10 ft. at the front according to ISO 1496, EN 284, or EN 452

Lighting:
* Lighting system according to EU regulations, 24 Volt
* Multi-chamber rear lights, license plate lights, side marker lights, and contour marker lights at the rear
* Connection plate at the drawbar including connecting cable with 15-pin and 2 x 7-pin plugs

Accessories included:
* 1 plug-in rotating beacon at the rear with registration for continuous light
* Additionally, with switch: 2 LED reversing lights at the rear on lamp bracket, operated via reverse gear
* Side and rear welded forklift bump stops
* 1 stainless steel toolbox each left and right behind the axles
* 6 x 25 cm side boards (3 per side) and front/rear wall made of anodized aluminum hollow sections, approx. 600 mm high
* Side boards foldable and removable, removable Kinnegrip stakes (internal width approx. 2,480 mm)
* Sideboard/stake magazine at the front on the front wall
* 1 additional mounting plate including parking sockets for air/electricity/EBS
Pjdpfx Aboxc Axxogjrd

Painting:
* Chassis hot-dip galvanized
* Side boards RAL 9010 Pure White
* Hubs KTL-Black
* Rear underrun guard RAL 9010 White
* Rims RAL 9006 Silver
* Vario

Огласот е автоматски преведен. Можно е да има грешки во преводот.