Henkel UVALOC 400 Loctite 97039 curing chamber with UV protective box II 97307

Henkel Uvaloc 400

Henkel
 
UVALOC 400 Loctite 97039 Curing Chamber
The UVALOC 400 curing chamber (LOCTITE 97039) is a surface irradiation curing system developed for curing light-curing adhesives using UVA radiation and visible light.
It is suitable for manual curing of individual parts during the manufacturing process as well as for laboratory use.
 
The device integrates the following:
a control unit with an integrated mains switch and operating hour counter
a lamp housing with the burner
reflector
igniter.
With UV protection box.
 
Features:
 
Contains a 400 W metal halide lamp
Optimized for light output in the UVA range
Typical curing area 10 x 19 cm
Expected UV lamp life up to 1000 hours
The power supply can be disconnected from the lamp module and operated separately
Adjustable lamp height for optimal irradiation
With glass filter to prevent short-wave UVB/UVC emission
 
Technical data:
Hfodpjzg Expsfx Am Ssn
Mains connection 230 V AC ± 4%, 50 Hz
Power consumption approx. 460 W
Mains fuse 2 x 5 A, slow-blow
Glass tube fuse 5 x 20 mm
Warm-up time for the UV lamp 3 minutes
Lamp type 400 W high-pressure metal vapor lamp with double-ended base
Lamp life approx. 1000 hours
Intensity See section 5.1
Dimensions (width x height x depth): 220 mm 472 mm 300 mm
Ambient and operating temperature + 10 °C ... + 30 °C
Storage temperature - 10 °C ... + 60 °C
Weight ~ 11.5 kg
 
Condition: used
 
Scope of delivery: (See picture)
 
(Changes and errors in the technical data are subject to change!)
 
We will gladly answer any further questions you may have by telephone.

Огласот е автоматски преведен. Можно е да има грешки во преводот.