Полуприколка со работна платформа

ES-GE 3-Achs-Sattelanhänger, Bordwände

You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.

Excerpt from the equipment list. Complete equipment list available upon request.

Chassis:
* Welded construction made of high-quality steel profiles with continuous profile crossmembers. Designed for high point loads.

Fifth Wheel:
* Fifth wheel plate with 2-inch King Pin.

Rear Underrun Protection:
* According to EC standards, bolted design.

Side Underrun Protection:
* According to EC standards.

Landing Gears:
* 2x 12 t landing gears with leveling foot and one-sided operation on the right side in the direction of travel.

Axles:
* 3x 9 t air suspension axle, manufacturer SAF, with disc brake approx. 430 x 45 mm, wheel mounting center-mounted ET120, ABS, total travel of the air suspension approx. 180 mm, including lifting approx. 110 mm and lowering approx. 70 mm.
* Control of the air suspension via hand control with stop function.

Steering:
* Last axle mechanically forced steering.

Axle Lift:
* First axle liftable, with fully automatic, load-dependent lift control.

Braking System:
* Two-line compressed air braking system according to EC standards with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, fail-safe coupling heads permanently mounted on the front crossmember, without connection line to the tractor.
* Manufacturer: Wabco.

Tires:
* 6, 385/65 R22.5 160J on rim 11.75 X 22,5 ET 120 - manufacturer of our choice. Including tire pressure monitoring system, tire pressure display in the driver's cab (pre-installation by the tractor manufacturer).

Fenders:
Gjdpfx Agjy Auhzekskc
* According to EC standards, 1/4 PVC fenders in front of and behind the axle.

Load Securing:
* 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t).
* 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t).
* In the outer frame, a hole for lashing straps is provided every approx. 500 mm (lashing straps can be hooked into the closed side walls, beveled outer frame).

Stake Pockets:
* 10 pairs of stake pockets in the outer frame, evenly distributed.
* 4 rows of stake pockets transverse to the loading area.
* Stakable stakes: 20 stakes made of galvanized tube approx. 80/50 mm, total length approx. 1,000 mm.
* Inside on the front wall, magazine for 20 stakable stakes.

Front Wall:
* Reinforced steel construction, fixed, inside covered with approx. 9 mm screen-printed floor (approx. 1,250 mm high).

Floor:
* Approx. 28 mm Z-hardwood floor embedded in the outer frame.

Side Walls:
* 4 x 25 mm side walls and rear wall made of extruded aluminum profiles, foldable and removable, removable Kinnegrip stakes.
* Side wall and stake magazine: under the chassis.
* Left and right insertion rails for side walls and stakes.

Lighting System:
* According to EC standards, 24 volts with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights.
* 1x 15-pin and 2x 7-pin connector on the front crossmember.

Equipment:
* Chock with holder, two units.
* Warning signs according to ECE 70.
* Work lights on the lamp carrier (switched on via reverse gear).
* Holder for rotating beacon on the rear, incl. rotating beacon.
* 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm.

Paint Finish:
* Chassis and front wall sandblasted, primed and single-color top coated.
* Chassis: hot-dip galvanized + R

Огласот е автоматски преведен. Можно е да има грешки во преводот.