Полуприколка со ниска платформа

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader Radmulden

You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.

Excerpt from the equipment list:
Complete equipment available upon request.

Gooseneck
* with angled front corners at approximately 45° and rear taper of approximately 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring, approximately 30 mm thick

Loading Platform
* Telescoping loading platform with rear taper of approximately 1,000 mm x 8°
* 1 pair of fixed wheel recesses in front of the axles, approximately 2,850 x 970 x 400 mm (L x W x H)
* Wheel recesses with square ladder rails approximately 15 x 15 mm, as well as widening in the lower area
* A pair of fixed wheel recesses between the 1st and 2nd axles, approximately 1,610 x 970 x 400 mm (L x W x H)
* Incl. 3-part removable galvanized covers over the wheel recesses (W approximately 670 mm), max. point load 5 t/piece.
* Recess in the taper and extending into the loading platform to accommodate the excavator arm (approximately 2,900 x 750 x 210/290 mm (L x W x H))
* 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN)
* 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN)
* 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN)
* 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN)
* Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN)

Two-part Steel Ramps
* One pair of galvanized two-part steel ramps, approximately 2,750 + 1,400 x 800 mm, with hardwood flooring approximately 48 mm thick
* Ramp with hydraulically extendable and foldable ramp sections and hydraulic lifting mechanism, hydraulically movable
* Maximum load per pair: 40,000 kg
* In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length when in the driving position.

Kingpin Supports
* JOST kingpin supports (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 t (approximate test load 50 t)

Axles
* BPW axles and suspension, 2 axles fixed, 1 axle steerable
* Technical axle load: 12,000 kg each
* Electro-magnetic reverse locking system via reverse gear and manually activated

Air Suspension
* with lifting and lowering valve. Axle tool

Tires
* 235/75 R 17.5 3PMS – manufacturer of our choice
* TPMS: TPMS tire pressure monitoring system in accordance with ECE R 141
* Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992
* For correct display, the tractor unit must be able to transmit and display this data

Braking System
* WABCO braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit

Steel Construction
* made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa)

Electrical System
* in accordance with EU regulations
* LED lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the turn signal
* ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets
Kdedjz Sh H Hopfx Aa Usu
* Connection according to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098

Paint Finish
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection
* Top coat with 2 layers of 2K topcoat, solid color in R

Огласот е автоматски преведен. Можно е да има грешки во преводот.