Отворена полуприколка со церада

KÖGEL MEGA Hubdach, Vario FIX, 1. Liftachse

Kögel MEGA S24 MEGA, lift axle on the 1st axle, lifting roof, Vario Loch-FIX frame, BPW axles, pallet stop strips left and right, sliding curtain sides, sliding roof cover, toolbox, 1st owner, as new condition.
Fedpfx Amezamrxo Seph

Permissible kingpin load: 12,000 kg
Technical possible kingpin load: approx. 12,000 kg
Permissible axle load: 24,000 kg (8,000 kg per axle)
Technical possible axle load: approx. 27,000 kg (9,000 kg per axle)
Permissible total weight: 36,000 kg
Technical possible total weight: approx. 39,000 kg
Unladen weight, basic equipment: approx. 6,130 kg
Unladen weight, individual configuration: approx. 6,582 kg
Theoretical payload: approx. 29,418 kg
Floor load capacity according to DIN EN 283 with test axle load 7,200 kg
(A) Wheelbase: approx. 6,390 mm
(A1) Axle spacing: approx. 1,310 mm
(A2) Axle spacing: approx. 1,310 mm
(D) Overall length: approx. 13,950 mm
(E) Overall width: approx. 2,550 mm
(F) Internal loading length: approx. 13,620 mm
(G) Internal loading width: approx. 2,480 mm
(G2) Rear through-loading width: approx. 2,480 mm
Tire size: 445/45R19.5
(H1) Loading height unladen, driving position level: approx. 1,020 mm
(H2) Loading height laden, driving position level: approx. 990 mm
(H3) Achievable dock height at rear with kingpin height 910 mm, loaded, raised: approx. 1,200 mm
Ride height set to 265 mm.
(K) Side through-loading height, internal: front approx. 2,735 mm - 2,860 mm [adjustable by 5x25 mm], rear approx. 2,810 - 2,860 mm [adjustable by 1x50 mm]
(K1) Height under roof, internal: front approx. 2,875 mm - 3,000 mm [adjustable by 5x25 mm] | rear approx. 2,950 mm - 3,000 mm [adjustable by 1x50 mm]
(X1) Overall height unladen, driving position level: = H1 + K + T +/- body height adjustment | = S + P + K + T +/- body height adjustment
(X2) Overall height laden, driving position level: = H2 + K + T +/- body height adjustment
Superstructure settings: The “Mega” superstructure design allows a height adjustment of 5x25 mm at the front and 1x50 mm at the rear. The relevant heights (total height, lateral through-loading height, internal height) change accordingly depending on the selected body setting.

(T) Roof construction height, side: approx. 180 mm. Due to the design of the roof beam, the internal pallet-width height corresponds to the specified internal height under the roof.
(N) Front overhang (according to ISO 1726): approx. 1,685 mm
(N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm
(O) Rear swing clearance (according to ISO 1726): approx. 2,300 mm
(P) Construction height above king pin: approx. 90 mm
(S) Possible kingpin height unladen: approx. 930 - 1,060 mm, horizontal at approx. 930 mm (Pay attention to overall height!)
Braking system in accordance with ECE-R13
Electrical system in accordance with ECE-R48
Wabco brakes, air suspension
BPW triple-axle assembly ECO Air with disc brakes Ø 370 mm, ET 120, 260 mm air suspension stroke.
6 x 445/45 R 19.5 tires
Pallet stop strips made of steel with VarioFix hole pattern (bolted), left and right in the direction of travel
Vario Fix steel-perforated outer frame with 3 pairs of stanchion sockets
Mechanical/hydraulic lift mechanism, lift height from lowest position approx. 500 mm/600 mm, 4 operating levers at each corner stanchion. Complies with safety regulations according to BGV D 29. (Lifting roof can only be operated with doors open!)
Load securing certificate according to EN 12642 XL (VDI 2700). Road transport only.
"Daimler load securing DL 9.5" certificate

Огласот е автоматски преведен. Можно е да има грешки во преводот.