Полуприколка со подвижен под

STAS 13.50 "WF 87 "FarmStar" GH 3,85m GMP-HCCP

Chassis
Manufactured in a self-supporting aluminum construction with corresponding reinforcements in the lower chord for particularly high stability and strength, unit chassis made of aluminum, 140 mm frame height! (max. 39 tons)

Axles and suspension: 22.5-ton disc brakes
Jost axle assemblies, 3 x 9-ton with DC air suspension, ken, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axles separately liftable with traction control (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension

Tires and wheels
6 wheels with tires size 385/65 R 22.5, manufacturer's choice
on Alcoa aluminum rims, satin, 11.75x22.5 ET120

Seatposts
Aluminum drop-lift supports, Alu Leg, with 2x10-ton drawbar load; we use swivel feet for the air suspension

Braking system
according to E.G. Standard, dual-line braking system, Wabco EBS system with RSS (Roll Stability Support) system, spring-loaded braking system acting on two axles with rear controls, aluminum air chamber system, premium modulator

Electrical system
Compliant with the German Road Traffic Licensing Regulations (STVZO) guidelines with two Aspöck Europoint III LED five-chamber lights integrated into the aluminum rear end, 24-volt system with one 15-pin and two 7-pin sockets, with LED side marker lights, two separate LED work lights at the rear, and two LED work lights on the sides. At the height of the seat posts, 1 LED work light inside, front left, can be operated from the outside.

Nedpfexuy I Iex Aftowp
Body/Trough "Fully welded body"
Front wall load 17,250 kgf/cm², rear and side walls 10,250/13,400 kgf/cm², aluminum body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper chords, plank profiles fully welded inside, floor as a moving floor system on 140 mm aluminum cross members, cross members mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profiles, 2-3 mm thick, straight design, special aluminum corner profiles, smooth rear wall, straight design, with two aluminum wing doors, 50/30 mm thick, with 4 espagnolette locks in the welded-in design. Aluminum rear frame mounted on Teflon bearings and stainless steel bearings, a sliding aluminum wall suspended from the reinforced aluminum top chord with a Kevlar tarpaulin for complete emptying, side brush seals and an additional Kevlar tarpaulin, an integrated grain hopper with a cover plate, operable from the outside with a viewing window at the rear left, and two test slides in the rear doors.

"Cargo Floor" 24-Board Hydraulic System
Moving floor system in the floor with hydraulically operated aluminum profiles mounted on square aluminum profiles with approximately 880 PE-HD sliders, approximately 6 mm smooth floor, hydraulics with approximately 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves of a size and design to be specified, operating pressure 190 - max. 240 bar, aluminum End pieces welded into the floor, rear left control with remote control in a lockable, waterproof box, without hydraulic hoses.

Accessories
PVC fenders with rubber mud flaps, aluminum spare tire holder, folding aluminum side bumpers, 1 plastic toolbox approx. 800x460x430 mm, approx. 3.7 m aluminum ladder, 680 g/m² roll-up tarpaulin with a roll-up tarpaulin system including a

Огласот е автоматски преведен. Можно е да има грешки во преводот.