HOMAG Optimat KAL 330

HOMAG Optimat KAL 330

Edgebander manufactured in 2006. This HOMAG Optimat KAL 330 features a flexible production layout for furniture parts, accommodating workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It includes a single-sided edge banding machine capable of processing various edge materials up to 20 mm thickness. If you are looking to get high-quality edge processing capabilities, consider the HOMAG Optimat KAL 330 edgebander we have for sale. Contact us for further details.

• Line workpiece capacity:
• Length 250–3000 mm
• Width 120–1200 mm
• Thickness 8–60 mm
• Edge bander (KAL 330) — base and transport
• Continuous machine base; workpiece support with roller bar extendable ~800 mm
• Transport chain 80 mm wide with rubber surface; precision guidance, hardened surfaces
• Top pressure: driven belt
• Technical data:
• Feed speed 18–25 m/min
Lrodpoytf Irjfx Akrjk
• Working height 950 mm
• Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depending on workpiece length)
• Workpiece overhang/supernatant 30 mm
• Workpiece thickness 12–60 mm
• Edge material from strip: 0.4–20 mm (max cross-section 900 mm²)
• Edge material from coil: 0.3–3 mm (max cross-section: PVC 135 mm², veneer 100 mm²)
• Max coil diameter 830 mm
• Pneumatic connection 7–8 bar
• Infeed system and controls (integrated with KAL 330)
• Flexible workpiece infeed system wz10 for automatic infeed (lengthwise and crosswise); for precisely sized, square parts
• Stepless infeed guidance adjustment (axis), speed set at input terminal
• Automatic side adjustment of units (workpiece overhang 30–80 mm) for gluing and post-processing
• Input terminal; solvent applicator top/bottom
• Edge preparation and gluing
• Pre-milling unit: 2 motors, each 4 kW, 150 Hz, 9000 rpm; electro-pneumatic control
• Stepless vertical axis SF20 for automatic centering to panel thickness
• Pre-melting unit with granule storage
• Quick-lock system for QA/QE application unit; QA front glue storage for color change
• Basic gluing unit A20; magazine height adjustment ±5 mm (manual spindle)
• Extended magazine A6/A-E12/A20 for 2 coils (max Ø 830 mm); preheating station for QA/QE
• Automatic pressure zone adjustment
• Trimming and milling
• Trimming unit HL84 with standing trimming stop for sensitive edges
• Pneumatic trimming motor adjustment (2 positions: flush/level and with overhang for contour milling)
• Pneumatic chamfer/straight changeover; manual side trimming stop adjustment when edge thickness changes
• Rough milling unit: 2 motors stacked, each 1.5 kW, 200 Hz, 12,000 rpm; height adjustment via top pressure
• Pneumatic 2-position setting: roughing with ~0.2 mm overhang / without overhang
• Reserved free space for a fine milling unit
• Contour milling unit Servo FK13 automatic:
• 2 motors each 0.4 kW, 200 Hz, 12,000 rpm
• Servo-controlled movements; automatic 8-fold tool changer
• Feed speed max 20 m/min; minimum spacing between workpieces 500 mm
• Workpiece thickness 12–60 mm
• Automatic FK adjustment for identical radii on different edge thicknesses; auto retract
• FK workpiece guidance with additional clamping for min part length 120 mm (single-sided)
• Finishing and cleaning
• Multi cleaning unit MN21 automatic:
• Up to 3 profiles; tracing from top/bottom/side for chamfer and rounding on pre-milled PVC edges
• Electropneumatic air nozzles; automatic chamfer/radius changeover; auto retract of upper/lower tool
• Height adjustment via top pressure
• PVC shavings separator top/bottom