Recycling extruderNext Generation Recyclingmaschinen GmbH
F:Gran 145-20
Recycling extruder
Next Generation Recyclingmaschinen GmbH
F:Gran 145-20
EXW Фиксна цена додава се ДДВ
99.000 €
Година на производство
2013
Состојба
Користено
(ограничена функционалност)
Локација
Bergen op Zoom 

Основни податоци
- Ознака на машината:
- Recycling extruder
- Произведувач:
- Next Generation Recyclingmaschinen GmbH
- Модел:
- F:Gran 145-20
- Број на машина:
- 12090
- Година на производство:
- 2013
- Состојба:
- потребно поправување (употребувано)
- Функционалност:
- ограничена функционалност
- Работни часови:
- 7.700 h
Цена и локација
EXW Фиксна цена додава се ДДВ
99.000 €
- Локација:
- Bergen op Zoom, Холандија

Повикајте
Детали за понудата
- ID на огласот:
- A22402837
- Референтен број:
- Z032
- Ажурирање:
- последно на 27.08.2026
Опис
This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago.
Installed power approx.: 474 kW
Cooling water requirement approx.: 190 l/min
Fresh water consumption approx.: 110 l/h
Feeding system:
• Diameter of the feeding screw: 200 mm
• Drive for the feeding screw: 45 kW, frequency-controlled
• Hopper capacity net 7 m³/250 ft³,
• Gear motor 3 × 3 kW
• 2 sight glasses in the hopper
• 2 level indicators
Extruder:
• Diameter of the extruder screw: 145 mm
• L/D ratio: 24
• Heating power: 50 kW
• Extruder drive unit 280 kW
Vacuum 1:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 11 kW
• Vacuum capacity: 225 m³/h
• Vacuum pressure: 33 mbar
Vacuum 2:
Pgodpfx Adsznz Ezsgou
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 7.5 kW
• Vacuum capacity: 190 m³/h
• Vacuum pressure: 33 mbar
Cylinder:
• Cylinder: Bimetal extruder cylinder,
• Reinforcement layer 1.8–2.0 mm thick,
• Hardness 63–65 HRC
Installation conditions:
• Voltage: 3 × 400 Volts
• Permissible fluctuation max.: +5 % – 5 %
• Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 %
• Protective measure: Multiple grounding
• Ambient temperature: min. 15 °C, max. 35 °C
• Humidity max.: 90 %
• Altitude of the installation site: 0 – 1000 m
The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe.
The details for optimal transport need to be clarified. The machine price is without packaging.
Огласот е автоматски преведен. Можно е да има грешки во преводот.
Installed power approx.: 474 kW
Cooling water requirement approx.: 190 l/min
Fresh water consumption approx.: 110 l/h
Feeding system:
• Diameter of the feeding screw: 200 mm
• Drive for the feeding screw: 45 kW, frequency-controlled
• Hopper capacity net 7 m³/250 ft³,
• Gear motor 3 × 3 kW
• 2 sight glasses in the hopper
• 2 level indicators
Extruder:
• Diameter of the extruder screw: 145 mm
• L/D ratio: 24
• Heating power: 50 kW
• Extruder drive unit 280 kW
Vacuum 1:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 11 kW
• Vacuum capacity: 225 m³/h
• Vacuum pressure: 33 mbar
Vacuum 2:
Pgodpfx Adsznz Ezsgou
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 7.5 kW
• Vacuum capacity: 190 m³/h
• Vacuum pressure: 33 mbar
Cylinder:
• Cylinder: Bimetal extruder cylinder,
• Reinforcement layer 1.8–2.0 mm thick,
• Hardness 63–65 HRC
Installation conditions:
• Voltage: 3 × 400 Volts
• Permissible fluctuation max.: +5 % – 5 %
• Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 %
• Protective measure: Multiple grounding
• Ambient temperature: min. 15 °C, max. 35 °C
• Humidity max.: 90 %
• Altitude of the installation site: 0 – 1000 m
The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe.
The details for optimal transport need to be clarified. The machine price is without packaging.
Огласот е автоматски преведен. Можно е да има грешки во преводот.
Документи
Доставувач
Забелешка: Регистрирајте се бесплатно или најавете се, за пристап до сите информации.
Регистриран од: 2026
16 Огласи онлајн
Испрати барање
Телефон & Факс
+43 660 2... огласи
Овие огласи исто така може да ве заинтересираат.
Успешно
Вашата порака е испратена.
Мал оглас
Gdańsk
1.437 km
Taiwan Pulp MoldingTPM-1500
Успешно
Вашата порака е испратена.
Мал оглас
Janville
1.723 km
SmipackBP800AR 280ST
Успешно
Вашата порака е испратена.
Мал оглас
Leiria
2.570 km
EremaD120
Успешно
Вашата порака е испратена.
Мал оглас
Koszalin
1.461 km
Wtryskarka automat do termobox fishboxstyropianowych EPS pustaków budowlanych
Успешно
Вашата порака е испратена.
Мал оглас
Ciriè
1.210 km
STAMSTAM-2000
Успешно
Вашата порака е испратена.
Мал оглас
Częstochowa
1.043 km
ReifenhäuserReicofil MB 1600
Успешно
Вашата порака е испратена.
Мал оглас
Premnitz
1.407 km
BARMAGKEP 200-26,3,3-S
Успешно
Вашата порака е испратена.
Мал оглас
Genthin
1.402 km
JenbacherJMS 312
Успешно
Вашата порака е испратена.
Мал оглас
Corse Lawn
2.148 km
Kiefel NatureformerKFT 90 Speed
Успешно
Вашата порака е испратена.
Мал оглас
Hennef (Sieg)
1.502 km
ReifenhäuserRH 51-1-35-25
Вашиот оглас беше успешно избришан
Се случи грешка























































































































































