Полуприколка со подвижен под

STAS ecoSTAR 90 cbm, Lenkachse, Hydraulisches Verdeck

ecoSTAR 90 cbm
graphite black
ECOSTAR FE CHASSIS - V13500 - VERTICAL FRONT WALL - VERTICAL REAR DOOR

Internal length of the body: 13500 MM
Internal width of the body: 2475 MM
Internal height of the body: 2650/2740 MM
Volume of the body: 90 cbm
Saddle height: 1150-1180 MM

TECHNICAL DESCRIPTION
1. FRAME
Hfedpfx Aszfdgiokioi
SUBFRAME High-quality steel S355JR (= ST52.3) construction. Chassis not painted but galvanized (EN ISO 1461), hot-dip galvanizing.

AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 tons Suspension: Original SAF air suspension Brakes: large disc - INTEGRAL Offset: ET 120 BVA: with

BRAKE WEAR INDICATOR

LIFT AXLE FUNCTION The third axle is a trailing steering axle (internal height front/rear 2650/2740 mm) + First axle is a lift axle

STARTING ASSISTANCE is activated when a button in the truck is pressed (truck equipment not included).

AIR SUSPENSION Lifting and lowering device. Aluminum air tank.

TIRES 6 x 385/65 R 22.5 on steel rims. ET 120.

SADDLE BRACKETS JOST module with outrigger pads for air-suspended vehicles. Steering with single-hand operation and 2 speed levels.

BRAKE SYSTEM - EBS EBS-E system WABCO 2S/2M - PREMIUM MODULATOR 2-line compressed air brake system according to CE guidelines. Spring brake parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System).

LIGHTING - ASPÖCK 24 Volt electrical system. 2 x 7-pole + 1 x 15-pole sockets

REAR LIGHTING IN THE UNDERBODY PROTECTION. With aluminum lighting protection (foldable). 2 x 1 five-chamber light - EUROPOINT III - LED version.

WORK LIGHT ON THE FRAME 2 x LED WORKPOINT work lights in front of the axles and 2 x behind the axles - with switch on the control console.

EXTRA WORK LIGHT 1 work light (Workpoint LED) on the front wall (INSIDE - right) - with switch in the front.

HYDRAULIC SYSTEM Pressure: ? Female. Return line: 1 Female.

HYDRAULIC POSITION Connection on the front wall. With additional connection option below the body in front of the support legs.

Aluminum ladder (3.7 m) attached to the side impact protection (right).
RETRACTABLE LADDER AT THE REAR integrated into the rear of the vehicle, on the right.

PNEUMATIC CENTRAL LOCKING With pneumatic central locking, with a 1-piece cover plate (floor cover not possible).

TOOLBOX PVC with key (800 x 460 x 430 mm). Rear LEFT

POSITION CONTROL CONSOLE + BOX TEM The control console is mounted on the rear left. The box for operating the floor system is also mounted on the rear left.

FENDERS 6 plastic single wheel fenders. 2 Clear Pass spray guards are permanently attached to the plastic fenders.

2. BIN
FRONT WALL The front wall consists of 30 mm thick aluminum plank profiles, type 600, with reinforced corner joints.

COVERING INSIDE BETWEEN FLOOR-FRONT WALL Solid seal between the floor and the front wall by means of an aluminum profile and PVC sealing.

SIDE WALLS Side walls with smooth design inside and outside. Double-walled side wall profiles 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain version). The side wall profiles are continuously welded together on the inside.

FLOOR SYSTEM CARGO FLOOR CF 500 SL-C E-operation. 21 floor slat system. Drive segment consisting of 3 hydraulically double-acting cylinders with a working stroke of 200 mm. Rear end plate made of aluminum.

OPERATION OF THE FLOOR SYSTEM E-operation - Electrical with remote control (original Cargo Floor + multifunctional).

Огласот е автоматски преведен. Можно е да има грешки во преводот.