Electric dual screwdriver unit with automatic feed, pneumatic double stroke, mounted on handling dev

BÖLLHOFF / BOSCH REXROTH / JÄGER HANDLING UVS-100-2-R-E / Handy-Flex 300

Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology.

Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E
The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation.

Screwdriver 1 consists of the following components:
- Rexroth type servomotor
- Rexroth type 0 planetary gearbox
- Rexroth type 0 encoder
- Rexroth type 0 straight drive head

Screwdriver 2 consists of the following components:
- Rexroth type servomotor
- Rexroth type 0 planetary gearbox
- Rexroth type 0 encoder
- Rexroth type 0 offset drive head

Dimensions (WxHxD): 165 x 1000 x 200 mm
Pneumatic long stroke: 30 mm
Pneumatic short stroke: 20 mm
Screwdriver spring travel: 20 mm
Last screws used: M6 x 15 mm

Electric screwdriver unit Rexroth
Servomotor Rexroth
Type: EC302 SZ3
Material number: 0
Torque: 0.6 Nm/A
Peak torque: 0.7 Nm
Speed: max. 20,000 rpm
Current draw: max. 7 A
Weight: 0.8 kg

Gearbox unit Rexroth
Type: 3GE27 SZ3
Material No.: 0
Efficiency: 90%
Reduction ratio: i=18.9
Max. torque: 10 Nm
Weight: 0.4 kg
Installation length: 65.5 mm

Encoder Rexroth
Type: 2DMC012 SZ2
Material No.: 0
Nominal torque: 12 Nm
Reduction: 1
Efficiency: 1
Weight: 0.55 kg
Fedpfefx Hyfsx Agpogc
Installation length: 118.5 mm

Straight drive head Rexroth
Type: 2GA82 SZ2 1/4"SQ
Material No.: 0
Spring travel: 20 mm
Spring force: 16 - 34 N
Tool holder: 1/4" square
Max. torque: 10 Nm
Reduction: 1
Weight: 0.2 kg
Installation length: 90 mm

Offset drive head Rexroth
Type: 2VNA82 SZ2 1/4"SQ
Material No.: 0
Spring travel: 20 mm
Spring force: 16 - 34 N
Tool holder: 1/4" square
Max. torque: 10 Nm
Reduction: 1
Weight: 0.6 kg
Installation length: 153 mm

Handling system: JÄGER HANDLING
Type: Handy-flex 300
Horizontal movement: 400 mm
Vertical movement: 450 mm
Load capacity: max. 14 kg
Handyflex reach: 250 to 650 mm
Handyflex reach (swung out): max. 860 mm
Swivel radius at full extension: max. 360°
Guide column vertical: Ø 30 mm
Guide columns horizontal: Ø 20 mm
- Balancer for vertical movement
- Adjustable load capacity
- Adjustable stop for limiting swivel radius

Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm
Total weight: approx. 90 kg
Good condition

Without the blue steel pallet as base plate
Blue steel base plate is not included in the scope of delivery.

Огласот е автоматски преведен. Можно е да има грешки во преводот.