Screw Compressor COMPACT + tankCORMAK
LUFT 1500 VSD+PM COMPACT + 500L tank
Screw Compressor COMPACT + tank
CORMAK
LUFT 1500 VSD+PM COMPACT + 500L tank
фиксна цена додава се ДДВ
4.679 €
Година на производство
2026
Состојба
Нов
Локација
Siedlce 

Сликите прикажуваат
Прикажи карта
Податоци за машината
- Ознака на машината:
- Screw Compressor COMPACT + tank
- Произведувач:
- CORMAK
- Година на производство:
- 2026
- Состојба:
- ново
Цена и локација
фиксна цена додава се ДДВ
4.679 €
- Локација:
- Brzeska 120, 08-110 Siedlce, Polska

Повикајте
Детали за понудата
- ID на огласот:
- A21043232
- Ажурирање:
- последно на 22.01.2026
Опис
CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER
SET INCLUDES:
LUFT 1500 VSD+PM COMPACT screw compressor with dryer.
Horizontal compressed air receiver 500 L.
Key features that distinguish these models:
1. Permanent Magnet (PM) Motor Technology
Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors:
They achieve efficiency levels compliant with IE4 or even IE5 standards.
Ksdjychbajpfx Abaowt
They maintain high efficiency even at very low speeds, where standard motors lose performance.
They are smaller, lighter and generate less heat.
2. Advanced Inverter Control (VSD)
The core of the Energy Saver line is a frequency converter (inverter).
Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy.
Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss.
3. Soft Start
Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which:
Protects the plant’s electrical installation.
Allows frequent start-stops without overheating the windings.
4. Real Savings
In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life.
Technical Parameters
Motor power 11 kW / 15 HP
Voltage 400V / 50Hz
Output 0–6 bar 1620 L/min
Output at 6 bar 1580 L/min
Output at 8 bar 1350 L/min
Output at 10 bar 1230 L/min
Outlet connection (G) 1"
Dimensions 1600 × 740 × 1750 mm
Weight 500 kg
SET INCLUDES:
LUFT 1500 VSD+PM COMPACT screw compressor with dryer.
Horizontal compressed air receiver 500 L.
Key features that distinguish these models:
1. Permanent Magnet (PM) Motor Technology
Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors:
They achieve efficiency levels compliant with IE4 or even IE5 standards.
Ksdjychbajpfx Abaowt
They maintain high efficiency even at very low speeds, where standard motors lose performance.
They are smaller, lighter and generate less heat.
2. Advanced Inverter Control (VSD)
The core of the Energy Saver line is a frequency converter (inverter).
Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy.
Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss.
3. Soft Start
Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which:
Protects the plant’s electrical installation.
Allows frequent start-stops without overheating the windings.
4. Real Savings
In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life.
Technical Parameters
Motor power 11 kW / 15 HP
Voltage 400V / 50Hz
Output 0–6 bar 1620 L/min
Output at 6 bar 1580 L/min
Output at 8 bar 1350 L/min
Output at 10 bar 1230 L/min
Outlet connection (G) 1"
Dimensions 1600 × 740 × 1750 mm
Weight 500 kg
Доставувач
Забелешка: Регистрирајте се бесплатно или најавете се, за пристап до сите информации.
Испрати барање
Телефон & Факс
+48 25 63... огласи
Овие огласи исто така може да ве заинтересираат.
Мал оглас
Германија
1.302 km
DemagEHK 10000-21000
Мал оглас
Германија
1.369 km
FELDERFORMAT 4 KAPPA 550
Мал оглас
Brandbu
2.229 km
RandekBS05 og BS10U
Вашиот оглас беше успешно избришан
Се случи грешка




































