CTS temperature chamber CTS T-40/2000 Temp. -40°C to +180°C 2000 liters

CTS T-40/2000

CTS

Type: T-40/2000

Air-cooled temperature test chamber

Technical design:

Refrigeration unit:
air-cooled, low-noise, hermetically sealed, stepless power adjustment
via electronic monitoring and control system,
environmentally friendly refrigerant R404A

Door:
fully opening door, left-hand door stop,
one-hand operation, lockable.

Insert shelf:
stainless steel, support area 970 x 980 + 500 mm
load per shelf max. 35 kg
total load with max. shelf load 100 kg

Test chamber lighting: 3x halogen lamp 20 W, 12 V

Control:

32-bit controller
LCD control panel
Digital display of setpoint and actual values
Numerical input of setpoints
Plain text error messages
RS 232 interface
free switching channels for on-site control of the test item

Temperature range: -40°C to +180°C

Rated voltage: 400V 3/N 50Hz
Rated power: 10.4 kW
Rated current: 17.2 A
Compressor: TFH2516Z

Pipe connection NW 50
Control panel
Window 570x710 mm
Electrical connection, cable length 5m

Technical performance data:

Temperature tests:
Temperature range -40°C to +180°C
Temperature deviation ≤ ±0.3 K over time
Temperature change rate according to IEC 60068-3-5
Heating 2.5 K/min
Cooling 1.5 K/min

Heat radiation:
approx. 2500 W at +20°C
approx. 2100 W at ± 0°C
approx. 1500 W at -20°C

The technical data refer to an ambient temperature of +25 °C,
rated voltage 400V, without test item, without radiation and without additional devices.

Dimensions:
Test volume: 2000 liters
Test chamber dimensions: height 900, width 975, depth 2200 mm
External dimensions: height 1950, width 1290, depth 3145 mm

Operating data:
Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz
Rated power: 17.2 kW
Protection class: IP 22
Condensate drain, non-pressurized, R 1/2" internal thread
Sound pressure level (according to DIN EN ISO 3744
measured at a distance of 1m from the front) < 55 dB(A)
Weight: approx. 1200 kg

For your safety as a buyer, the following information!

The following points are carried out on our offered chambers in advance:
1. Functional check and replacement of necessary components
Ibjdpfx Aezg Twaekvjc
2. If necessary, new filling with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, the chambers are subjected to a documented test run.

Condition: used

Scope of delivery: (See picture)

(Changes and errors in the technical data and specifications are subject to change!)

We would be happy to answer any further questions you may have by telephone.

Огласот е автоматски преведен. Можно е да има грешки во преводот.