Shredding plant

muetek MRZ 530 ECO - 15 kW

Special price for our prefeeder
Another machine, available immediately (ex works Neckartailfingen)
approx. 24 operating hours.

Including:
+ profile rotor for increased throughput

Options:
Double row of knives + 895 € net
Veneer and paper scraper + 970 € net
* Recommended for extremely thin materials with a thickness of less than 3 mm

Our mütek MRZ 530 single-shaft shredder shreds a wide variety of materials such as all types of waste wood, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cable, paper, cardboard and plastics. The machine is characterized by its robust design, which guarantees consistent quality in continuous operation.

We will be happy to carry out a free test with your material. We invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we can document the test with pictures and videos.

Machine data:
Motor: 15 kW; 400 V - 50 Hz - 3 ph,
Blades: multi-rotatable,
Hodpfxod Db N Is Adhenu
Rotor diameter: 260 mm,
Control: PLC Siemens S7-1200,
Hopper (mm) 510 x 810 mm,
Hopper volume approx. 0.4 qbm,
throughput 1 - 5 hopper fillings / h,
hydraulically operated pusher,
Screen perforation of your choice (10 - 40 mm),
suction nozzle Ø 160 mm,
Weight approx. 1,000 kg,
Dimensions approx. 1550 x 1100 x 1640 mm,
Moisture content of the raw material: must be below 30 % atro.

Included as standard:
- Fast hydraulics
- Profile rotor
- Switch cabinet with Siemens PLC control
- Automatic star/delta start
- Automatic OFF when the rotor is idling
- Removable suction chute
- Speed 70 - 100 rpm for higher throughput capacity
- Cycle control to avoid idle times
- Performance-enhancing step control of the hydraulic slide
- Stable guides for the hydraulic slide

Other shredder options:
- Raise shredder by 30 cm (preparation for conveyor belt) +1,980 € net

- Folding conveyor belt +8,770 € net
Horizontal part: 1200 mm
Rising part: 2500 mm
Angle: 0-60 degrees adjustable
Discharge height: approx. 2000 mm
+ - 100 mm

- Overbelt magnet + 5.980 € net
- Conveyor belt and overbelt magnet control + € 2,750 net
(start and stop synchronized with the chipper)
.
Requirements for the output or raw material:
- The moisture content (atro) must be below 30%
- Metals and mineral impurities such as sand, stones, etc. lead to increased wear

Огласот е автоматски преведен. Можно е да има грешки во преводот.