Edge banding machine SCM Minimax E10 (2019)

SCM Minimax E10

Edge banding machine
Manufacturer: SCM
Type: Minimax E10
Year of manufacture: 2019
Technical data
Edge thickness (strip material): 0.4 - 3.0 mm
Edge thickness with shear cutter at 80 mm edge height: 0.4 - 1.5 mm
Edge thickness with shear cutter at 50 mm edge height: 0.4 - 2.5 mm
Edge thickness with shear cutter at 45 mm edge height: 0.4 - 3.0 mm
Edge height: 10 - 84 mm
Workpiece thickness: 8 - 80 mm
Minimum workpiece width: 50 mm
Minimum edge length: 210 mm
Minimum inner radius (concave) at 0.4 mm edge: 25 mm
Minimum outer radius (convex) at 0.4 mm edge: 5 mm
Feed speed: 4 / 8 m/min
Processing temperature: 140 - 220 °C
Edge feed
Integrated shear cutter for cutting edge material from the roll.
Gsdszuykpjpfx Am Seuh
Roll table for holding roll material.
Suitable for ABS edges, melamine edges, veneer edges, and other pre-fabricated edge strips.
Gluing system
Teflon-coated glue tank below the table top.
Continuous glue circulation to prevent glue deposits.
Fast heating time of approx. 7 minutes.
Standby function with timer.
Glue tank capacity: 1.5 liters.
Pressure system
Motor-driven glue application roller.
One free-running pressure roller.
Foot pedal for start and stop control of the working cycle.
Note:
The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Огласот е автоматски преведен. Можно е да има грешки во преводот.