Log house milling machine Auertech

Auertech BL100A

Used machine
Year of manufacture: 2023, delivered in 2024
Condition: as new, machine is in original packaging and has not been commissioned

Equipment and technical data:

Infeed Table / Cross Conveyor:
- Number of strands: 6 × Supergrip timing belts
- Pitch: 650 / 650 / 850 / 1500 / 1500 mm
- Length: approx. 1.8 m
- Drive: geared motor, 1.5 kW
- Minimum workpiece infeed length: 0.8 m
- Function: Automatic transfer of raw material by lowering level to the infeed table

Infeed Table:
- Smooth sliding table with sliding plastic for damage-free feeding of raw material by servo pusher into the machining zone
- Support width: approx. 200 mm

BLOCKHAUS 4F-SERVO (main milling unit):
- Machining dimensions: 140 × 200 mm
- Maximum horizontal milling depth top: 60 mm
- Maximum horizontal milling depth bottom: 35 mm
- Maximum vertical milling depth: 95 mm
- Milling spindles: Ø 30 mm
Fjdoxavtkepfx Afzoft
- Horizontal milling tools: 2 × D = 220 mm × W = 120 mm
- Vertical milling tools: 2 × D = 280 mm × W = 120 mm
- Motor power: 4 × 4.0 kW
- Feed: horizontal and vertical via SERVODRIVE, infinitely variable via software
- Milling depth adjustment: spindle with digital counter
- Workpiece clamping devices: vertical pneumatic, horizontal pneumatic
- Extraction: below-floor hopper Ø 160 mm (pit by customer required)
- Control: IPC / PLC / IITO software
- Machine frame prepped for end tenon or dovetail milling, drilling unit and crosscut saw
- Machine enclosure: fully closed, with swiveling safety hood (gas strut, viewing window)
- Electrical control cabinet on base, cable carrier 3.0 m

Option i (automatic milling depth adjustment for 4F milling unit):
- Four additional NC-controlled servo axes for automatic positioning of the 4F tools
- Control via IPC / IITO software
- Function: automatic milling depth adjustment with ±0.1 mm tolerance
- Extended machining capabilities:
- individual grooves and millings on four component sides,
- recesses and markings for window and door openings,
- double and triple joints,
- half corner joints (e.g. for top and bottom log beams)

Tools:
- 2 × 3-piece groove cutter D 220 mm, width 21–65 mm, LM
- 2 × 3-piece groove cutter D 280 mm, width 21–65 mm, LM
- 1 × end tenon cutter D 240 mm × 20 mm
- 1 × dovetail cutter D 40 mm, width 15 mm

Combination End Tenon & Dovetail Milling Unit:
- 3-axis milling unit for production of end tenons and dovetail joints
- End tenon cutter Ø 240 mm × width 30 mm
- Max. milling depth for end tenon: 40 mm
- Dovetail width variable
- Motor power: 4.0 kW
- Speed: inverter-controlled, max. 4,500 rpm
- Feed (DT.Y axis): SERVODRIVE, infinitely variable
- Height adjustment (DT.Z axis): SERVODRIVE
- Rotation adjustment (DT.R axis): SERVODRIVE
- Workpiece clamping device: vertical pneumatic
- Minimum beam thickness for longitudinal connection: 80 mm
- Control: automatic via IPC / PLC / IITO software

Horizontal Drilling Unit with Drill Guide (BGD SERVO):
- Max. drilling diameter: Ø 30 mm
- Drill Ø = 20 mm included in delivery
- Motor power: 1.1 kW
- Speed: 1,500 rpm
- Feed: SERVODRIVE, infinitely variable
- Height adjustment (Z axis): SERVODRIVE, digital counter
- Workpiece clamping device: vertical pneumatic

Огласот е автоматски преведен. Можно е да има грешки во преводот.