Zeiss Contura Vast XT Gold CMMZeiss
CONTURA 9/18/8
Zeiss Contura Vast XT Gold CMM
Zeiss
CONTURA 9/18/8
EXW Фиксна цена додава се ДДВ
110.000 €
Година на производство
2020
Состојба
Користено
(целосно функционален)
Локација
Budapest 

Податоци за машината
- Ознака на машината:
- Zeiss Contura Vast XT Gold CMM
- Произведувач:
- Zeiss
- Модел:
- CONTURA 9/18/8
- Година на производство:
- 2020
- Состојба:
- многу добро (користено)
- Функционалност:
- целосно функционален
- Работни часови:
- 12.500 h
Цена и локација
EXW Фиксна цена додава се ДДВ
110.000 €
- Локација:
- Budapest, Унгарија

Повикајте
Технички детали
- Растојание на движење на Х-оската:
- 900 мм
- Движење по оската Y:
- 1.800 мм
- Растојание на движење Z-оска:
- 800 мм
- Влезен напон:
- 230 V
- Година на последниот генерален ремонт:
- 2025
- Опрема:
- документација / прирачник
Детали за понудата
- ID на огласот:
- A22566042
- Ажурирање:
- последно на 17.08.2026
Опис
We are offering the following: a Zeiss CONTURA 9/18/8 Vast XT Gold CMM in very good condition, manufactured in 2020.
Type: CMM CONTURA 9/18/8
Year of manufacture: 2020
Operating voltage: 100–240 V
Frequency: 50–60 Hz
We are selling our ZEISS Industrial Quality Solutions Contura 9/18/8 CMM, installed in 2020. It has been housed in a climate-controlled measuring room since day one.
The data, taken directly from Zeiss's service log (as of June 2025):
- 10,284 operating hours
Iedpjzuzf Isfx Ak Asif
- 169.9 km traveled by the axes combined (X: 49.5 km, Y: 80.4 km, Z: 40.1 km)
- Approximately 2,000 hours per year, consistently, with the same steady pace – no last-minute overtime before we listed it
- Zero significant component replacements
- Relocated, serviced, and recalibrated in June 2025 – all results within tolerance, no laser correction needed
One honest point, because we don't deal in exaggerated claims: the controller logged a few probe collisions over the years, some at higher speeds. However, probe performance was still good and passed the 2025 calibration without issue. We're mentioning this now so you won't find it in the log later and wonder why we didn't disclose it.
Probe head: VAST XT Gold
Software: Calypso CNC 7.2 + QS-Stat-out
Included accessories: PC, monitors, sensor rack
Other accessories (stylii from GOEKELER Messtechnik GmbH, fixturing elements from dk FIXIERSYSTEME GmbH & Co. KG) are available upon request (we have a large supply, please inquire), and you can also take the compressor (from Atlas Copco) and other accessories.
Price: €110,000 net (packed by Zeiss (with the original transport frame and pallet) and loaded onto your truck at our office in Budapest, Hungary)
It has measured everything from a few millimeters to 2 meters and has never failed us; it is still in daily use.
If you have any questions or need further information, please send us a message or call us.
Огласот е автоматски преведен. Можно е да има грешки во преводот.
Type: CMM CONTURA 9/18/8
Year of manufacture: 2020
Operating voltage: 100–240 V
Frequency: 50–60 Hz
We are selling our ZEISS Industrial Quality Solutions Contura 9/18/8 CMM, installed in 2020. It has been housed in a climate-controlled measuring room since day one.
The data, taken directly from Zeiss's service log (as of June 2025):
- 10,284 operating hours
Iedpjzuzf Isfx Ak Asif
- 169.9 km traveled by the axes combined (X: 49.5 km, Y: 80.4 km, Z: 40.1 km)
- Approximately 2,000 hours per year, consistently, with the same steady pace – no last-minute overtime before we listed it
- Zero significant component replacements
- Relocated, serviced, and recalibrated in June 2025 – all results within tolerance, no laser correction needed
One honest point, because we don't deal in exaggerated claims: the controller logged a few probe collisions over the years, some at higher speeds. However, probe performance was still good and passed the 2025 calibration without issue. We're mentioning this now so you won't find it in the log later and wonder why we didn't disclose it.
Probe head: VAST XT Gold
Software: Calypso CNC 7.2 + QS-Stat-out
Included accessories: PC, monitors, sensor rack
Other accessories (stylii from GOEKELER Messtechnik GmbH, fixturing elements from dk FIXIERSYSTEME GmbH & Co. KG) are available upon request (we have a large supply, please inquire), and you can also take the compressor (from Atlas Copco) and other accessories.
Price: €110,000 net (packed by Zeiss (with the original transport frame and pallet) and loaded onto your truck at our office in Budapest, Hungary)
It has measured everything from a few millimeters to 2 meters and has never failed us; it is still in daily use.
If you have any questions or need further information, please send us a message or call us.
Огласот е автоматски преведен. Можно е да има грешки во преводот.
Доставувач
Забелешка: Регистрирајте се бесплатно или најавете се, за пристап до сите информации.
Последен пат онлајн: минатата недела
Регистриран од: 2023
1 Оглас онлајн
Испрати барање
Телефон & Факс
+36 20 41... огласи
Овие огласи исто така може да ве заинтересираат.
Мал оглас
Wiesbaden
1.407 km
HAUSERNr. 215
Мал оглас
Enger
1.539 km
FAROFaroarm 3m Quantum M MAX 3.0m 7 axis / M
Мал оглас
Германија
1.313 km
MAZAKHCN 6000-II (+ HCN 6000)
Мал оглас
Langenfeld (Rheinland)
1.547 km
CADstar Neo universell,offenes System
Мал оглас
Root
1.225 km
MITUTOYOCRYSTA Apex S 9168
Мал оглас
Белгија
1.655 km
MitutoyoCrysta Apex S-9106 CMM
Мал оглас
Mönchengladbach
1.576 km
BatySM300
Мал оглас
Weilheim an der Teck
1.234 km
Carl Zeiss IMT GmbHPrismo Mass 12/18/10 VAST Gold
Мал оглас
Wiesbaden
1.407 km
WERTHRecord 73
Мал оглас
Halberstadt
1.403 km
YOU JIHMC 1200 BP
Вашиот оглас беше успешно избришан
Се случи грешка




























































































