Stencil Cleaner

AAT (Austin American Technology) X Series Stencil Cleaner

New Stencil cleaning machine from AAT. CE certified for European market use, manufactured in the US.

All machines come with 12 months warranty!

X30TM & X40TM Series Stencil / Misprint / PCB Cleaner CHEMISTRY TYPE: X30TM and X40TM models are available for flammable and combustible solvents/chemistries as well as aqueous based chemistries. SYSTEM CAPABILITIES: Stencil / Misprint / PCB Defluxing All In One System The X-Series system is designed around counter-rotating blind hole high energy spray bars. The added pressure allows the system to successfully clean fine pitch stencils, low stand-off components, misprinted throughhole, blind assemblies, and the ability to remove uncured glues and adhesives, yet gentle enough to use on frameless and foil stencils. Independent Wash and Rinse Holding Tanks The system features two independent holding tanks, which allow for lower water use. Final DI water rinse (if selected) displaces spent rinse water in the rinse tank throughout the rinse operation. This provides for higher tank cleanliness, and component cleanliness. Large Process Chamber Dimensions X-30TM Series Process Reservoir: 30” x 30” x 3” (76.2 cm x 76.2 cm x 7.62 cm) X-40TM Series Process Reservoir: 40” x 40” x 3” (101.6 cm x 101.6 cm x 7.62 cm) Conforms with NFPA 70, NFPA 79, IES, NEMA 1, NFPA 13, OSHA Tool Specifications: X30ATM Footprint: 48.5” W X 44” D X (59” to 90”) H (123.19 cm x 111.76 cm x (149.86 cm to 228.6 cm) X40ATM Footprint: 58.5” W X 44” D X (59” to 90”) H (148.59 cm x 111.76 cm x (149.86 cm to 228.6 cm) Electrical: 220V, 60Hz, 20AMPs, 3 Phase X30ATM Weight: 500 lb (227 kg) X40ATM Weight: 700 lb (318 kg)

Dsdpfx Agovzrklebscr
Ask for additional information to find the best configuration for Your needs!