Pallet wrapper turntable stretching

ATLANTA - 25mm flacher Drehteller SYNTHESI - 200% Vorreckung

Exhibition machine, like new.

SYNTHESI with a flat turntable
Turntable height 25mm
Short ramp 500mm long


TECHNICAL DETAILS:
Turntable LOW PROFILE
· Height 25mm
· Max. pallet dimensions: 1000 x 1200 mm
· Max. load capacity: 1200 kg
· a ramp included

Wrapping height (pallet included) 2,200 mm
Height query by light button
Cgedpfx Asykucmsgmep
Frequency-controlled turntable drive (soft start - start/stop)
Frequency controlled carriage speed up/down
Signal tone at the start of wrapping and stop at the end of the cycle
Emergency stop switch according to CE regulations
The turntable always stops in the same starting position
Fall protection for the film slide
Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm

ADJUSTABLE PARAMETERS ON THE CONTROL PANEL
All function parameters can be set via the display
F00 - Screen lock program change
F02 - Infinitely variable turntable speed 5-12 rpm
Lifting carriage speed can be adjusted up and down independently of each other
F03 - lifting carriage speed up from 1.3 up to 5.4 m/min
F04 - carriage speed down from 1.3 to 5.4 m/min
F05 - Number of wraps on the pallet foot (1 - 10 wraps)
F06 - number of wraps on the pallet head (1 - 10 wraps)
F09 - Winding height photocell delay
F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable
F62 - Ergonomic height for film change
Foil consumption display (optional)

ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL
6 storable winding programs
F01 - 1 - cross winding (up/down)
F01 - 2 - Single wrap (only up or only down)
F01 - 3 - Push button for manual functions
F10 - F11 - Wrap cycle with preset start and stop height
F12 - Winding to a stored height (switching off the light button for the height)
F22 / F23 - Winding cycle for cover sheet film
F29 - Soft start cycle for edge protection application
F30 - F31 - Wrap cycle with gain and adjustable number of wraps
Soft start to reduce film tears on sharp pallet edges
Winding cycle with manual or motorized line formation (optional)
Reinforcement cycle via push button

FILM SLIDE TYPE "OPRS - ONE PRE STRETCH"
Film pre-stretch ratio set to 200%
Foil application tension electronically controlled via control unit
Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm
Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ
Total power: 1.2KW / 8A
Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible

Other systems available from the Ludwigsburg warehouse.