Overhead Conveyor Shot Blasting MachineCETINGIL
ASK-KON Overhead Blasting Machine
Overhead Conveyor Shot Blasting Machine
CETINGIL
ASK-KON Overhead Blasting Machine
година на производство
2025
Состојба
Нов
Локација
Турција 

Сликите прикажуваат
Прикажи карта
Податоци за машината
- Ознака на машината:
- Overhead Conveyor Shot Blasting Machine
- Произведувач:
- CETINGIL
- Година на производство:
- 2025
- Состојба:
- ново
Цена и локација
- Локација:
- , Турција

Повикајте
Детали за понудата
- ID на огласот:
- A20453530
- Ажурирање:
- последно на 04.11.2025
Опис
Overhead Continuous Shot Blasting Machine?
An overhead continuous shot blasting machine is an automatic surface cleaning system used mainly for removing rust, scale, paint, or other impurities from metal surfaces.
In this system, the workpieces are suspended from an overhead conveyor line and pass continuously through a blasting chamber, ensuring high productivity and consistent quality.
⚙️ Working Principle
Loading:
The parts are hung on rotating hooks or hangers attached to an overhead conveyor line.
Transportation:
The conveyor automatically carries the parts into the blasting chamber.
Blasting Process:
Inside the chamber, high-speed turbines throw steel shots or abrasive media onto the surface of the parts.
This removes rust, scale, burrs, and old paint layers, leaving a clean, roughened surface.
Rotation of the Hanger:
The hooks or hangers usually rotate to ensure that all surfaces of the part are evenly blasted.
Discharge and Recovery:
After blasting, the parts exit the chamber. The used abrasive is collected and recycled, while dust is filtered through an efficient dust collection system.
CODE W: x H: Turbine
ASK-KON - 1 1.000 x 1.000 4 x F400
ASK-KON - 2 1.000 x 1.500 6 x F400
ASK-KON - 3 1.000 x 2.000 8 x F400
ASK-KON - 4 1.500 x 3.000 12 x F400
Hfsdpsxuhf Iofx Aafop
ASK-KON - 5 1.500 x 4.000 12 x F500
An overhead continuous shot blasting machine is an automatic surface cleaning system used mainly for removing rust, scale, paint, or other impurities from metal surfaces.
In this system, the workpieces are suspended from an overhead conveyor line and pass continuously through a blasting chamber, ensuring high productivity and consistent quality.
⚙️ Working Principle
Loading:
The parts are hung on rotating hooks or hangers attached to an overhead conveyor line.
Transportation:
The conveyor automatically carries the parts into the blasting chamber.
Blasting Process:
Inside the chamber, high-speed turbines throw steel shots or abrasive media onto the surface of the parts.
This removes rust, scale, burrs, and old paint layers, leaving a clean, roughened surface.
Rotation of the Hanger:
The hooks or hangers usually rotate to ensure that all surfaces of the part are evenly blasted.
Discharge and Recovery:
After blasting, the parts exit the chamber. The used abrasive is collected and recycled, while dust is filtered through an efficient dust collection system.
CODE W: x H: Turbine
ASK-KON - 1 1.000 x 1.000 4 x F400
ASK-KON - 2 1.000 x 1.500 6 x F400
ASK-KON - 3 1.000 x 2.000 8 x F400
ASK-KON - 4 1.500 x 3.000 12 x F400
Hfsdpsxuhf Iofx Aafop
ASK-KON - 5 1.500 x 4.000 12 x F500
Доставувач
Забелешка: Регистрирајте се бесплатно или најавете се, за пристап до сите информации.
Регистриран од: 2024
Испрати барање
Телефон & Факс
+90 312 3... огласи
Вашиот оглас беше успешно избришан
Се случи грешка




























