Panel Press high frequency

Orma LS ECO 25/13

High frequency panel Press Orma Model LS ECO 25/13
Year of production: 2022
Technical condition: very good

Manufacturer: Orma Macchine – Italy
Work Table and Feed System:
• Work dimensions: 2500x1300 mm, 3.25 m²
• Mechanical pusher: length 2500 mm, used for advancing pieces into the press; fixed pushing speed; pushing bars operated by a chain system
• Limit switch for stopping the press at the end of the work table
• 1 foot pedal for moving pieces on the work table
• 1 emergency stop button
_____
Hydraulic Press Model LS/ECO:
• High-frequency platens, dimensions: 2500x1300 mm
• Mobile lower platen
• Vertical pressing system:
o 4 vertical pressing pistons with a diameter of 70 mm, maximum total force of 40 tons, stroke/opening: 150 mm
• Horizontal pressing unit:
o Consists of 5 double-acting pistons with a diameter of 40/25 mm that operate 5 steel pressing plates; stroke/opening: 150 mm
o Maximum total force: 7.5 tons
o Pistons can be activated via a special device to reduce the pressing area
• Rear vertical pressing unit:
o Used to fix the last pieces and contrast the lateral horizontal pressing unit, consisting of a steel bar (2500x150 mm)
o Actuated by 3 vertical pistons with a 70 mm diameter, total maximum force: 30 tons, stroke: 150 mm
• Side pressing unit and rear clamping device:
o Allows the production of pieces with unlimited length
• Two working cycles:
o Manual or automatic, selected by pressing a button
o Special cycle for adjusting after pressing
• Independent pressing units:
o Each of the three hydraulic units has an independent pressure setting
• Single hydraulic circuit:
o Uses the same oil reservoir
o Total power: 5 HP
• Main control panel equipped with all command options (PLC included) for press operation
• Press structure made of welded steel bars and profiles
_____
Evacuation System:
• Working dimensions: 2500x1300 mm
• Mounted at the rear of the press on the mobile pressing unit
• Gravity unloading system with triangular profile elements
_____
Isdpfx Adev Ayftsietb
INCLUDED:
a. High-Frequency Generator
• 20 kW high-frequency generator
• Adjustable to five frequency positions, allowing the generator to be used based on the type of operation
• Silicon diode bridge for constant efficiency
• Fully equipped with all components for connection to the press
• Press platens made of insulating materials, covered with aluminum plates to allow high-frequency transmission
o Aluminum coating functions as positive and negative poles (upper and lower platen)
b. Stainless steel platen coating
c. Height adjustment for side steel pressing plates
d. Additional thickness for the side pressing plates

We offer professional dismantling, loading, installation, commissioning, and training on machine operation.
We also provide ongoing maintenance services and access to spare parts.