CNC working center for windows and doors

Scm Integra System

Integrated NC machining center for windows and doors composed of:
A) Automatic loader mod. "SP"
Automatic loader for Base SP N. 1 moulder
-Automatic loader consisting of:
-Table with motorized belts
-Automatic device for moving pieces from the buffer to the
loading surface of the moulder
* Piece length min: 450 mm max: 3200 mm
* Piece width min: 40 mm max: 230 mm
* Piece thickness min: 40 mm max: 120 mm
* Work cycles 10/min
* Chain advancement speed on the table: 7 m/min
* Loading table dimensions 2800 x 2150 mm
B) Automatic moulder mod. SUPERSET NT C 6
Position 1 = Planer Shaft
Position 2= 1st right vertical shaft
Position 3= 1st left vertical shaft
Position 4= 1st upper horizontal shaft
Position 5= 1st lower horizontal shaft
Position 6= Group for slat recovery
2500 mm entry level
Speed 6-36 m/min via inverter No. 1
- engine power 5.5 hp (4 kw)
Horizontal presser before the planer with pneumatic exclusion from the panel
Pneumatic exclusion from the control panel for the feed unit located before the planer shaft
Tandem advance group in front of the right vertical with rapid exclusion
Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm
Input guide with bearings for automatic feeders
Electrical predisposition for the use of automatic loaders
Manual centralized lubrication
Pump for lubrication of the work surface with automatic drive
Setup for in-line integration with INTEGRA SYSTEM
- work surface raised to 970 mm
- traffic light at entrance
- piece counting
Independent electrical panel
POS. 1
High precision shaft
10 hp (7.5 kw) engine instead of 5.5 hp (4 kw)
Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw)
T-SET quick tool locking
-allows tool locking/unlocking with the simple use of a compressed air gun
POS. 2
High precision shaft
10 hp (7.5 kw) engine instead of 5.5 hp (4 kw)
Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw)
Vertical shaft with a useful length of 180 mm
T-SET quick tool locking
Electronic vertical positioning
POS. 3
High precision shaft
10 hp (7.5 kw) engine instead of 5.5 hp (4 kw)
Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw)
High precision shaft
Vertical shaft with a useful length of 180 mm
T-SET quick tool locking
Electronic horizontal positioning
POS. 4
High precision shaft
10 hp (7.5 kw) engine instead of 5.5 hp (4 kw)
Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw)
Rotation speed 8300 rpm
T-SET quick tool locking
Electronic vertical positioning
POS. 5
High precision shaft
10 hp (7.5 kw) engine instead of 5.5 hp (4 kw)
Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw)
Rotation speed 8300 rpm
T-SET quick tool locking
POS. 6
Glass bead recovery group
Comprehends:
PRL allows the automatic transition from planing to function
recovery of the glazing bead and vice versa.
- operating group with shaft diameter 30 mm, length 30 mm
- electronic horizontal positioning
- electronic vertical positioning
Hjdpfx Aeixxwmja Djg
- hardware and PLC modifications for axis management
- tandem exit and modified hood
second advancing group after the universal
C) Connection transfer
Transfer for receiving pieces from the moulder and automatic insertion into the Sott