Transfer machineMikron
MSR CX 24
Transfer machine
Mikron
MSR CX 24
Година на производство
2003
Состојба
Користено
Локација
Bösingen 

Сликите прикажуваат
Прикажи карта
Податоци за машината
- Ознака на машината:
- Transfer machine
- Произведувач:
- Mikron
- Модел:
- MSR CX 24
- Година на производство:
- 2003
- Состојба:
- добра (користена)
- Функционалност:
- целосно функционален
Цена и локација
- Локација:
- Bösingen, Германија

Повикајте
Технички детали
- Капацитет на резервоарот за течност за ладење:
- 2.000 l
Детали за понудата
- ID на огласот:
- A21259712
- Ажурирање:
- последно на 17.02.2026
Опис
Used, well-maintained transfer machine / rotary indexing table machine / dial-type machine MIKRON MULTISTAR CX 24
Availability: immediately
The following modifications have been carried out on the system:
Machine:
- All motor cables replaced.
- All sensor cables replaced.
- PLC program adapted to enable and disable collets.
- Converted to Knoll coolant system.
- Wiring diagram manually modified.
- Frequency inverter replaced.
- Part selector installed on the machine, including oil pump for oil return.
Saw:
- Saw control converted to Mitsubishi i-QR control system.
Nedpfsyk Hraex Admscn
- Complete electronics of the saw renewed.
- Saw fully mechanically overhauled.
Accessories:
- 1 x loading station (brass D = 3.9 mm)
- 1 x unloading station
- 1 x part selector (8-position, see picture)
- 1 x lateral drilling unit
- 1 x rotary straightening device (fully newly mounted October 2023)
- 1 x feed / saw unit (control and inverter overhauled in 2021)
- 1 x pneumatic loader (via feed tube)
- 1 x chip conveyor with dirty water pump (without chip trolley)
- 1 x KNOLL coolant system (2,000 liters) with drum screen filter, wash pump, and vacuum pump, including low-pressure pump (5 bar) and high-pressure pump (60 bar)
The machine has been operated with cutting oil.
If you have any questions or require further information, feel free to send us a message or call us.
Огласот е автоматски преведен. Можно е да има грешки во преводот.
Availability: immediately
The following modifications have been carried out on the system:
Machine:
- All motor cables replaced.
- All sensor cables replaced.
- PLC program adapted to enable and disable collets.
- Converted to Knoll coolant system.
- Wiring diagram manually modified.
- Frequency inverter replaced.
- Part selector installed on the machine, including oil pump for oil return.
Saw:
- Saw control converted to Mitsubishi i-QR control system.
Nedpfsyk Hraex Admscn
- Complete electronics of the saw renewed.
- Saw fully mechanically overhauled.
Accessories:
- 1 x loading station (brass D = 3.9 mm)
- 1 x unloading station
- 1 x part selector (8-position, see picture)
- 1 x lateral drilling unit
- 1 x rotary straightening device (fully newly mounted October 2023)
- 1 x feed / saw unit (control and inverter overhauled in 2021)
- 1 x pneumatic loader (via feed tube)
- 1 x chip conveyor with dirty water pump (without chip trolley)
- 1 x KNOLL coolant system (2,000 liters) with drum screen filter, wash pump, and vacuum pump, including low-pressure pump (5 bar) and high-pressure pump (60 bar)
The machine has been operated with cutting oil.
If you have any questions or require further information, feel free to send us a message or call us.
Огласот е автоматски преведен. Можно е да има грешки во преводот.
Доставувач
Забелешка: Регистрирајте се бесплатно или најавете се, за пристап до сите информации.
Испрати барање
Телефон & Факс
+49 7404 ... огласи
Овие огласи исто така може да ве заинтересираат.
Мал оглас
Denzlingen
1.307 km
MAZAKINTEGREX i-300 1000U
Мал оглас
Brügg
1.303 km
MAZAKINTEGREX 400-3S
Мал оглас
Германија
1.392 km
TORNOSDECO 2000-10
Вашиот оглас беше успешно избришан
Се случи грешка



















































