Dividing head

Rottstedt Roundinho 60P

Compact, precision CNC rotary table suitable for single-piece or small-batch production in precision engineering. A horizontal or vertical configuration is possible. You can't buy better quality!
- Made in Germany -
It can be used as a 4th axis on engraving and milling machines for engraving, laser processing, drilling, milling slots, or on tool and surface grinding machines. Square, hexagonal, and gear milling of any pitch, or 3D machining are possible.

Precision worm gear with a reduction ratio of 100:1.
Output torque well over 25 Nm.
The drive is powered by a controlled 1.8-degree stepper motor with 3.2A and a holding torque of 1.2 Nm.
The worm and worm gear are manufactured in-house, guaranteeing the highest precision. The pair is mounted on four ball bearings and adjusted for zero backlash, and can be readjusted.
The one-piece, stable output spindle is equipped with a faceplate, d=108 mm, with an MK 1 internal taper and a through hole of 10.3 (optional M12 internal thread).
The electronic control as a handy module with 14 travel programs and 2 reference point travels as well as step monitoring with a power supply is included in the package.
The optimized pre-programming is done in 360 (for milling operation), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, 0.02 incremental repeat cycles, right and left travel, and cycle pauses, which can of course be programmed.
Njdpfx Asd Erdrectsld
With the software you can:
Travel programs and cycles; absolute or incremental travel values. The actual value of the rotary axis can be easily queried at any time using the software. Using an output, you can receive start pulses from an NC machine. Complex scaling divisions, transverse bores or gears can be produced quickly.

In addition, you can now use a start pulse to run several different travel angles one after the other.
For example, incrementally 30 degrees, then 3 degrees, then 90 degrees, then 1.45 degrees, with or without a pause, or rotate back.

Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron or Gravograph.
NEW: As an additional option, all 16 travel steps as well as start and reference commands can now be controlled externally by your NC control system using M-functions.
Optional: Locking air with splash guard.
We can offer standard clamping devices for your applications. Furthermore, we have the possibility to quickly and inexpensively manufacture special clamping devices for you.

Special accessories:
3-jaw chuck 80 mm: 125 Euro
# 600011 3-jaw chuck 100mm bore 25 mm and an adapter plate (center height adjustment to 80 mm): 300 Euro
# 600021 Tailstock: height adjustable 60 - 80 mm: 150 Euro
# 600030 Clamping device for ER 25 collet with nut: 125 Euro
# 600031 USB data cable for programming via PC: 150 Euro
# 600032 Programming of your travel angles: 40 Euro
# 600033 Test travel program and test report of the final inspection: 100 Euro
# 600036 Collet set ER 25 up to D16 mm 10 pcs.: 125 Euro
# 600037 Clamping device for ER 32 collet with nut up to D20: 125 Euro
# 600097 Control cable with magnetic switch - read contact for automation without NC machine output: 25 Euro
# 600099 Acceptance / Programming / Aluminum case / Software provision: 80 Euro

Огласот е автоматски преведен. Можно е да има грешки во преводот.