Bending machineBluhm Systeme
e-SolarMark FL
Bending machine
Bluhm Systeme
e-SolarMark FL
фиксна цена додава се ДДВ
4.800 €
Состојба
Користено
Локација
Borken 

Податоци за машината
- Ознака на машината:
- Bending machine
- Произведувач:
- Bluhm Systeme
- Модел:
- e-SolarMark FL
- Состојба:
- непроверено (употребувано)
Цена и локација
фиксна цена додава се ДДВ
4.800 €
- Локација:
- Einsteinstraße 8a, 46325 Borken, Deutschland

Повикајте
Детали за понудата
- ID на огласот:
- A22186232
- Референтен број:
- 23922
- Ажурирање:
- последно на 23.06.2026
Опис
Bluhm Systems Marking Laser
Here we offer a Bluhm Systems marking laser.
Bluhm Systems marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested).
Introduction:
The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 standards (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing.
After installation, the laser system must meet the requirements for a product of a specific protection class, according to the aforementioned standards.
The e-SolarMark is a laser system for marking and engraving plastics, metals, and films, both stationary and in motion.
Technical specifications
e-SolarMark description
The e-SolarMark system consists of two main components:
1. The marking unit with laser head (scanning head) with focusing lens.
2. The control unit includes the power supply, electronic control system, and firmware for system operation, with I/O slots inside.
The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm.
Laser specification in standard configuration
Laser type: Fiber laser
Laser output power: FL2 model: 19W; typical
Wavelength: 1062 nm typical
Internal modulation: 20 to 80 kHz
Scanner head description:
Scan head: Two galvanometric mirror scanners with a hard, highly reflective dielectric coating.
F-Theta
Lens types and their properties:
Lens marking field: 70x70 mm to 300 x 300 mm
Focal length: B 192 mm
Lasdpfezgci Eox Aftsc
Operating environment conditions:
Relative humidity: up to 80%, non-condensing
Operating temperature: 5 - 40°C
Recommended operating temperature: 15-25°C
Dimensions W x H x D
Laser unit: 122 x 108 x 495 mm
Control unit: 520 x 380 x 215 mm
Cable length, marking/control unit: 3 m
Weight, marking unit: 5 kg
Weight, control unit: 15 kg
Mains voltage
115/230 VAC, 50/60 Hz, single-phase.
Power consumption, FL2 model: 450W
Type: e-SolarMark FL
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We would be happy to answer any further questions you may have by phone.
Огласот е автоматски преведен. Можно е да има грешки во преводот.
Here we offer a Bluhm Systems marking laser.
Bluhm Systems marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested).
Introduction:
The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 standards (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing.
After installation, the laser system must meet the requirements for a product of a specific protection class, according to the aforementioned standards.
The e-SolarMark is a laser system for marking and engraving plastics, metals, and films, both stationary and in motion.
Technical specifications
e-SolarMark description
The e-SolarMark system consists of two main components:
1. The marking unit with laser head (scanning head) with focusing lens.
2. The control unit includes the power supply, electronic control system, and firmware for system operation, with I/O slots inside.
The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm.
Laser specification in standard configuration
Laser type: Fiber laser
Laser output power: FL2 model: 19W; typical
Wavelength: 1062 nm typical
Internal modulation: 20 to 80 kHz
Scanner head description:
Scan head: Two galvanometric mirror scanners with a hard, highly reflective dielectric coating.
F-Theta
Lens types and their properties:
Lens marking field: 70x70 mm to 300 x 300 mm
Focal length: B 192 mm
Lasdpfezgci Eox Aftsc
Operating environment conditions:
Relative humidity: up to 80%, non-condensing
Operating temperature: 5 - 40°C
Recommended operating temperature: 15-25°C
Dimensions W x H x D
Laser unit: 122 x 108 x 495 mm
Control unit: 520 x 380 x 215 mm
Cable length, marking/control unit: 3 m
Weight, marking unit: 5 kg
Weight, control unit: 15 kg
Mains voltage
115/230 VAC, 50/60 Hz, single-phase.
Power consumption, FL2 model: 450W
Type: e-SolarMark FL
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We would be happy to answer any further questions you may have by phone.
Огласот е автоматски преведен. Можно е да има грешки во преводот.
Испрати барање
Телефон & Факс
+49 2861 ... огласи
Вашиот оглас беше успешно избришан
Се случи грешка





















