Press brake

Bystronic Xpert 40/1030

Press force: 400 kN
Total bending length: 1030 mm
Standard stroke [S]: 200 mm
Clearance [D]: 515 mm
Distance between columns: 1060 mm
Table width: 60 mm
X-axis backgauge travel range: 500 mm
X-axis travel: 300 mm
X-axis travel speed: 1500 mm/s
R-axis travel: 100 mm
R-axis travel speed: 500 mm/s
Z-axis travel: 955 mm
Z-axis approach speed: 2000 mm/s
Y-axis approach speed: 300 mm/s
Maximum Y-axis bending speed: 25 mm/s
Y-axis positioning accuracy: 0.004 mm
Oil capacity: 100 l
Main drive power: 7.5 kW
Weight: 4 t
Length, approx. [L]: 1520 mm
Width, approx. [W]: 1584 mm
Height without increased clearance and stroke, approx. [H]: 2449 mm

1. Intelligent control system and drive with an exceptionally low noise emission (below 75 dB) in the Xpert 40 enables part production with about 30% lower energy consumption compared to conventional electrically-driven machines.
2. ByVision software with a 22-inch LCD display and touch technology
3. Intelligent process control guidance with Energy Saver
4. Automatic tool protection system
5. Foot pedal
6. Electrically operated protective sliding doors
Hsdjwv N Naepfx Abksi
7. User manual on CD
8. Ambient temperature from 7°C to 35°C
9. Voltage: 400 V, 50 Hz, 3 Ph
10. 'Bend G2' – optical safety system with manual height adjustment
11. 6-axis backgauge (3 additional axes)
12. 3-backgauge set - Xpert 40 (N0002.0040.000) - Set for integrating a third backgauge in the press brake
13. Ergonomic LED lighting package - Light output: 1500 lux
14. Ergonomic front supports with table. Max. load is 35 kg.
15. 'At your fingertips' tool cabinet - accommodates 3m of tools within easy reach (1 set of punches and 2 sets of dies).
16. Optical bending guidance system – the operator is guided throughout the bending process by the optical guiding system.
17. Ergo Bending Line Laser – Bystronic Bending Line Laser serves as a visual assistance for the operator by projecting a bending line on the material surface. The operator is supported by a virtual bending line when the backgauge fingers cannot be used (fully or partially). The laser line can be set at different heights depending on the die height (e.g., 55 / 100 mm), depending on material thickness or workpiece size.
18. Productive XPT clamping package (WILA NSCL II upper tool clamp and T12/90 table)
19. WILA hydraulic clamping package includes both upper and lower tool clamping with T12/90 table.
20. WILA NSCL II/XPT upper tool clamping (Productive clamping pack XPT) – XPT-type (Wila) upper tool clamping allows tool mounting in 0 and 180° orientations.
21. T12/90 table (Productive XPT clamping package) – T12/90 table with a height of 90 mm and width of 72 mm offers extensive space for Z-bends.

The machine is fully operational. In continuous use.

Viewing and testing of the machine are welcome.

Огласот е автоматски преведен. Можно е да има грешки во преводот.