Briquetting Press / Briquette Press

mütek Systemtechnik MPP 110

Machine manufacturing time: approx. 3.5 months

Very robust machine with high pressing force
- also suitable for producing marketable briquette quality, depending on the material. The large-sized pressing cylinder and the 65 mm briquette make this possible.

Our best-selling briquetting press series
+ Proven, simple technology for extremely low susceptibility to errors
+ 25 years of experience, continuous development and know-how
+ Several thousand machines in operation with satisfied customers
+ Good price-performance ratio

Options:

Additional cost for cooling unit: €3,995 net (can also be retrofitted later)
* cools the pressing jaws (important for operation of 3.5 hours or more) and the hydraulic oil
* Cooling unit recommended for regular operation of more than 3.5 hours at a time.

Large pre-compression chamber: €1,975 net
Recommended for lightweight raw materials such as wood shavings

Commodity code: 84793010
Briquette diameter: 65 mm
Front bushing: 65 mm
Briquette stroke max.: 50 mm
Briquette stroke opt.: 50 mm
Performance (material-dependent): up to 110 kg/h*
approx. 87 kg/h in the last test.
*depending on the bulk density
Podpfxeffh Ate Ackjgn
*based on a bulk density of 200 kg per cubic meter.

Motor power: 5.5 kW
400 volts / 50 Hz / 3-phase
Length: 1925 mm
Width: 1100 mm
Height: 1500 mm
Weight: 800 kg
Oil volume: 110 liters
Silo diameter: 1000 mm
Silo volume: approx. 0.7 cubic meters
Pump: 37 liters
Hydraulic pre-compressor
Option: Cooling of pressing jaws: yes, with special accessories for coolable pressing jaws
Cooling of the pressing jaws via water tank (to be provided on site)
Option: Cooling of hydraulic oil: yes
Option: Level monitoring: yes
Option: Log briquettes: yes (material-dependent)
CE compliant

Requirements for the raw material:
- The moisture content (oven-dry) must be between a minimum of 6% and a maximum of 18%
- Chip length maximum 15 mm
- Installation temperature: temperature-controlled room at a minimum of +5°C
- The feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear can result.

Огласот е автоматски преведен. Можно е да има грешки во преводот.