Rotary Welding TableMB
PRO 2 COM 1802
Rotary Welding Table
MB
PRO 2 COM 1802
Состојба
Нов
Локација
Ahaus 

Сликите прикажуваат
Прикажи карта
Податоци за машината
Цена и локација
- Локација:
- 48683 Ahaus

Повикајте
Детали за понудата
- ID на огласот:
- A19924315
- Референтен број:
- 1125-8459010
- Ажурирање:
- последно на 20.10.2025
Опис
table diameter 340 mm
table load 160 horizontal kg.
table load 100 vertikal kg.
turning speeds 0,6 - 6,0 U/min
swivelling range 0 - 90 Grad
Nodpfx Afsxabm Njtowp
bore 60,0 mm
motor 230 Volt
weight of the machine ca. 56 kg.
range L-W-H 385 x 340 x 375 mm
Furnishing:
- The table can be adjusted at an angle of 0 to 90 degrees tilt and jam
- Start / stop via a location-independent foot switch.
- Direction of rotation can be selected right / left.
- Adjustable rotation time
- The turntable has a 60 mm hollow shaft
- The turntable has a diameter of
340 mm. The surface is chrome-plated for
Protection against welding spatter.
- The table speed is adjustable from 0.6 - 6 rpm.
- The control of the welding machine via
the turntable control is possible.
- The ground contact transmits 300 A / 100%.
- The turntable and the control are separate.
- HF protected.
- COM 1800 control with lap welding
- Operating instructions in German
Functions COM 1800 control:
- Right/left rotation
- Infinitely variable speed control
- Welding torch on/off
- Overlap welding adjustable
- Controller for rotation time (2-stroke / 4-stroke)
- Speed display
table load 160 horizontal kg.
table load 100 vertikal kg.
turning speeds 0,6 - 6,0 U/min
swivelling range 0 - 90 Grad
Nodpfx Afsxabm Njtowp
bore 60,0 mm
motor 230 Volt
weight of the machine ca. 56 kg.
range L-W-H 385 x 340 x 375 mm
Furnishing:
- The table can be adjusted at an angle of 0 to 90 degrees tilt and jam
- Start / stop via a location-independent foot switch.
- Direction of rotation can be selected right / left.
- Adjustable rotation time
- The turntable has a 60 mm hollow shaft
- The turntable has a diameter of
340 mm. The surface is chrome-plated for
Protection against welding spatter.
- The table speed is adjustable from 0.6 - 6 rpm.
- The control of the welding machine via
the turntable control is possible.
- The ground contact transmits 300 A / 100%.
- The turntable and the control are separate.
- HF protected.
- COM 1800 control with lap welding
- Operating instructions in German
Functions COM 1800 control:
- Right/left rotation
- Infinitely variable speed control
- Welding torch on/off
- Overlap welding adjustable
- Controller for rotation time (2-stroke / 4-stroke)
- Speed display
Доставувач
Забелешка: Регистрирајте се бесплатно или најавете се, за пристап до сите информации.
Регистриран од: 2011
Испрати барање
Телефон & Факс
+49 5939 ... огласи
Вашиот оглас беше успешно избришан
Се случи грешка





















