Bevel gear cutting machine

Klingelnberg C 28 P

Workpiece Data
Maximum workpiece diameter: 275 mm
Maximum normal module: 6 mm
(at the pitch circle in steel with 600–700 N/mm² tensile strength)
Minimum normal module: 1.5 mm
Maximum face width: approx. 5.5 mm
Maximum helix angle: approx. 60°
Maximum number of teeth: 120
Minimum number of teeth: 5
Maximum transmission ratio: 1:10
Minimum transmission ratio: 1:1

Technical Data
Dimensions and Weights
Required space (L x W x H): 5200 x 2300 x 2400 mm
(includes all auxiliary units and electrical cabinet with doors open)
Net weight (including standard accessories): approx. 15,500 kg
Gross weight with standard accessories and overseas packaging: approx. 16,800 kg
Chip conveyor: 300 kg
Coolant tank with chip conveyor: 450 kg
Swarf filter (optional): 600 kg

Power Supply and Connection Data
Total connected load: 75 kVA
Frequency: 50 Hz ± 1 %
Voltage: 3 × 400 V ± 10 %
Protection: 100 A slow-blow
Power interruption: max. 3 ms
Voltage dip: max. 20% of peak voltage for max. 20 ms
Voltage spikes: max. 200% of nominal voltage for 1.5 ms
Harmonic content: max. 10% of effective value
Mains symmetry (voltage difference between 2 phases): max. 2% of nominal voltage
Protective earth: interference-free
Control voltage: 24 V DC
Special configurations: on request
Gkedpfxsxmgr De Adhec
Mains configurations: see Chapter 5.2
Connection location (installation and foundation plan): see Chapter 5.2

Compressed Air Supply
Pressure: min. 3.5 bar, max. 10 bar
Flow rate (with open nozzle): 0.03 Nm³/min
Humidity (max. pressure dew point): 10°C
Temperature: 10°C to 40°C
Solid particle size up to: 40 µm
Connection and size: see Chapter 5 (installation and foundation plan)

Огласот е автоматски преведен. Можно е да има грешки во преводот.