Briquetting press

mütek MPP 180

Availability upon request

Very robust machine with high pressing force
- also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible.

Our best-selling briquetting press series
+ Proven, simple technology for extremely low susceptibility to errors
+ 25 years of experience, further development, and know-how
+ Several thousand machines in use with satisfied customers
+ Top price-performance ratio

Supplement for demonstration cooling unit + €4,980 net,
(can also be retrofitted later)
* Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil
* Cooling unit recommended for regular use of more than 4 hours at a time.

Tariff number: 84793010,
Briquette diameter: 70 mm,
Front bushing: 125 mm,
Max. briquette stroke: 100 mm,
Optional briquette stroke: 80 mm,
Capacity (depending on material): up to 150 kg/h*
*depending on bulk density,
*based on a bulk density of 200 kg per cubic meter.
.
Motor power: 9.2 kW,
400 volts / 50 Hz / 3-phase,
Length: 2095 mm,
Dedjd Nm Sijpfx Aacsup
Width: 1300 mm,
* with large chamber 1600 mm
Height: 1700 mm,
Weight: 1250 kg,
Oil capacity: 220 liters,
Silo diameter: 1200 mm
Silo capacity: approx. 1 cubic meter
Pump: 75 liters
Hydraulic pre-compressor
Cooling option for pressing tongs: yes, with optional coolable pressing tongs
Cooling option for hydraulic oil: yes
Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory)
Level monitoring option: yes
Extruded briquette option; Yes (depending on material)
Optional enlarged feed slide: Yes, with special accessory enlarged feed slide
CE compliant

Raw material requirements:
- The moisture content (dry) must be between a minimum of 6% and a maximum of 18%
- Maximum chip length: 20 mm
- Installation temperature: Temperature-controlled room at a minimum of +5°C
- The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Огласот е автоматски преведен. Можно е да има грешки во преводот.