Alzmetall GS 800/3

Alzmetall GS 800/3

This 3-axis Alzmetall GS 800/3 vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of 800 mm, Y-axis travel of 800 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN iTNC 530 control and a robust table surface area of 920 x 900 mm, supporting a maximum table load of 1,800 kg. If you are looking to get high-quality machining capabilities, consider the Alzmetall GS 800/3 machine we have for sale. Contact us for further details.

Guodpfxez R Sz Es Am Soh
- Distance Spindle to Rigid Table: 150 – 650 mm - Table T-Slots: 9 T-slots according to DIN 650 in X-direction, 14 H12 width, 100 mm pitch, 14 H7 center alignment slot, table lowered by 80 mm - Spindle Type: Water-cooled high-frequency motor spindle with hybrid spindle bearings and oil-air lubrication - Spindle Taper: HSK-A63 according to DIN 69893 -- Max. Torque: 139 Nm at 25% duty cycle - Spindle Features: New spindle in 2025, thermal expansion compensation, sealing air seal, air blow through spindle center - Rapid Traverse (X/Y/Z): 45 m/min - Max. Acceleration (X/Y/Z): 10 m/s² - Max. Feed Force (X/Y/Z): 10 kN at 40% duty cycle - Measuring Systems: Dual direct linear measuring systems for X/Y, direct linear measuring system for Z - Positioning Accuracy (Tp): 0.007 mm according to DIN ISO 230-2 - Tool Magazine: Chain magazine with 33 tool positions - Tool Change System: Pick-up system - Max. Tool Diameter: 90 mm (full configuration) / 130 mm (with free adjacent positions) - Max. Tool Length: 300 mm - Max. Tool Weight: 10 kg - Max. Total Tool Weight: 160 kg - Tool Change Time: Approx. 2 seconds - Chip-to-Chip Time: Approx. 6 seconds - Operating Voltage: 3x 400 V - Mains Frequency: 50 Hz - Total Rated Current: 55 A - Mains Supply Fuses: 63 A gG - Required Supply Pressure: Min. 6 bar - Required Network System: TN network - Transport Dimensions: Approx. 2,250 mm (W) x 4,760 mm (D) x 2,800 mm (H) - Additional Equipment & Features: - HEIDENHAIN TS 640 3D touch probe with infrared transmission - HEIDENHAIN TT 140 automatic tool measurement - HR 410 electronic handwheel - Automatic roller shutter roof cover - Scraping-belt chip conveyor (for short metal chips up to 80 mm length) - All-round sheet steel enclosure - Stainless steel interior lining of the machining area - Work area lighting - Electrically secured horizontal sliding door with mechanical locking - Control cabinet cooling- Missing/Excluded Components: Coolant tank is NOT included (no coolant tank, no pumps, no chip flushing hose)