Briquetting press Briquetting press aluminum

mütek MPP NEM 90

All wear parts are new.
Only 704 operating hours.

Special price for a lightly used demonstration unit.
Base machine: €29,990 net.

Options available at an extra charge:
- Cooling unit: €3,995 net
- Emulsion tank: €3,990 net
Rcedpfx Absd N Dnhj Rsd

The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable, cylindrical briquettes. The machines are characterized by a robust design that guarantees consistent briquette quality during continuous operation. The pressing process takes place without the addition of binders, solely through hydraulic pressure. The volume of the raw material can be reduced by up to 90%, depending on the material.

Throughput: up to a maximum of 70 kg/h (material-dependent),
Briquette diameter: Ø 50 mm,
Motor: 5.5 kW,
400 volts / 50 Hz / 3-phase,
Pump: 40 liters,
.
Maximum briquette length: 50 mm,
Optional briquette length: 40 mm,
Silo diameter: 1,000 mm,
Oil tank: 110 liters.
.
Dimensions: 1750x1130x1100 mm (l x w x h)
Weight: 950 kg.
.
Hydraulic pre-compaction via sliding plate.
Main press cylinder.
Vertical cylinder.
.
Level sensor: yes.
.
Requirements for the raw material:
- Max. chip length: 15 mm
- Installation temperature: temperature-controlled room at a minimum of +5°C
- Max. weight on agitator: 150 kg.
- The feed material must be free of magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Огласот е автоматски преведен. Можно е да има грешки во преводот.