8-spindle automatic chucking automatSchütte
ADH 160
8-spindle automatic chucking automat
Schütte
ADH 160
година на производство
1981
Состојба
Користено
Локација
Hövelhof 

Сликите прикажуваат
Прикажи карта
Податоци за машината
- Ознака на машината:
- 8-spindle automatic chucking automat
- произведувач:
- Schütte
- Модел:
- ADH 160
- Број на машина:
- 225
- година на производство:
- 1981
- Состојба:
- половен
Цена и локација
- Локација:
- Mergelweg 206, 33161 Hövelhof, DE
Повикајте
Детали за понудата
- ID на огласот:
- A7750655
- Референтен број:
- WKG 386
- ажурирање:
- последно на 15.07.2024
Опис
Manufacturer: Schütte
Type: ADH 160
Machine No.: 225
Year of manufacture: 1981
Weight: 11t
General / technical data:
max. turning length: 125mm
max. workpiece diameter: 168mm
max. drilling depth: 125mm
adjustable number of pieces: from 3,4 to 450 sec.
working hours: 8.200h
working spindle speed: from 90 to 1120 rpm
footprint (l x w x h): approx. 4730 x 1700 x 2120mm
power supply: 380V / 50Hz
Accessories:
7 cross slide
8 longitudinal slides
Thread cutting device
Gedpfx Adoipu U Usheuh
4x 2-jaw chuck Ø160mm
chuck type: pull chuck with clamping diameter 15
Chuck type: Röhm 0W-406 682 Clamping force 1200 da N
4x 3-jaw chuck Ø160mm
Chuck type: Draw chuck with clamping diameter 15
Chuck type: Röhm 1W-406 681 Clamping force 1800 da N
Insertion arm over chuck 100mm.
The workpiece is fed to the insertion arm by a swivel arm and rotary gripper.
Remark:
The machine is in very good condition and has very few operating hours.
The machine is set up for crankshaft halves for small combustion engines.
Type: ADH 160
Machine No.: 225
Year of manufacture: 1981
Weight: 11t
General / technical data:
max. turning length: 125mm
max. workpiece diameter: 168mm
max. drilling depth: 125mm
adjustable number of pieces: from 3,4 to 450 sec.
working hours: 8.200h
working spindle speed: from 90 to 1120 rpm
footprint (l x w x h): approx. 4730 x 1700 x 2120mm
power supply: 380V / 50Hz
Accessories:
7 cross slide
8 longitudinal slides
Thread cutting device
Gedpfx Adoipu U Usheuh
4x 2-jaw chuck Ø160mm
chuck type: pull chuck with clamping diameter 15
Chuck type: Röhm 0W-406 682 Clamping force 1200 da N
4x 3-jaw chuck Ø160mm
Chuck type: Draw chuck with clamping diameter 15
Chuck type: Röhm 1W-406 681 Clamping force 1800 da N
Insertion arm over chuck 100mm.
The workpiece is fed to the insertion arm by a swivel arm and rotary gripper.
Remark:
The machine is in very good condition and has very few operating hours.
The machine is set up for crankshaft halves for small combustion engines.
Документи
Доставувач
Забелешка: Регистрирајте се бесплатно или најавете се, за пристап до сите информации.
Регистриран од: 2003
Испрати барање
Телефон & Факс
+49 5257 ... огласи
Вашиот оглас беше успешно избришан
Се случи грешка