Laminating machine

Foliant Vega 400A Laminator

Ref:11050 . 2017 Foliant Vega 400A Laminator.
New generation, very compact, single sided thermal laminator designed for heavy-duty digital outputs.
Equipped with:
Integrated deep pile vacuum feeder and a high-speed bump separator
Non-sticky pressure roller and in-run adjustable twin decurl bar and overlap system.
Pneumatic high-pressure system (with integrated compressor inside machine frame)
Suitable for all jobs – all kinds of digital printed sheets lamination and high volumes of offset printed sheets size B3+ lamination too.
The machine maximum speed is up to 18 m/min while performance is over 2100 sheets per hour of B3 portrait (white paper 200 gsm).
Feeder:
Equipped with a rising pile front separation stream feeder and with a vacuum belt head.
Built-in Becker vacuum pump is used for sheets front airing and feeding head vacuum.
Overlaps are controlled, in an ‘in-run’ mode.
Accuracy is +/- 2 mm under-lap (in a constant speed).
Fitted with a lifting plate and its capacity is a 28 cm pile of paper.
Laminator:
Maximum sheet size is 38 x 66 cm (which is the maximum outputs format from Xerox iGen4).
The minimum sheet size is 20 x 30 cm.
Compressor is integrated inside the machine frame as standard.
Laminating unit is equipped with an adjustable twin decurl unit:
• With a decurl blade for offset printed sheets decurling
• With a decurl roller for digital printed sheets decurling (to prevent scratches on sheets printed on both sides by digital print with sensitive inks).
Roll of a film is mounted on a quick-changed shaft with a film tension control breaker.
Shaft capacity is up to 3000 m of the 24 - 42 microns film.
Film holder unit is equipped with an in-line trim slitter and a perforating wheel.
2 x laminating rollers - a highly polished chrome roller, and a lower hard rubber pressure roller with non-sticky surface.
Pressure is pneumatically adjustable.
Laminating roller is heated with a dry electric system inside the roller, with a sensitive temperature sensor.
Warming up time is shorter than 10 minutes.
Controlled by an interactive, easy understandable icon based touch screen
System includes many automation items for an easy control of the machine and a reliable lamination.
Separator:
Integrated bump separator (sheeter) is equipped with a pair of fast cycling rollers.
Separated sheets are delivered into a vibrating jogger
Laminating Films:
BOPP films (24 – 42 microns)
Nylon films (24 - 35 microns)
Specification:
Ksdpfjx Nftnsx Aa Denf
Maximal Speed: single side 18 m/min.
Feeding System: Automatic, vacuum belt, Feeder's Capacity 28 cm
Overlaps: In-Run Screw control, Overlaps Accuracy ± 2 mm
Paper Weight: 115–500 g/m²
Main Roller Pressure System: Pneumatic
Minimal Sheets Size (w×l): 20×30 cm
Maximal Sheets Size (w×l): 38x66 cm
Maximal Performance: 2100 B3 / hod.
Temperature Control: 80–140 °C, Warming Up Time 8 min
Power Supply: 230 V AC, 50-60 Hz
Power: 3150 W
Mechanical Parameters: Floorspace (w×l) 82×198 cm, Weight: 370 kg