MAZAK INTEGREX i-100H S

Mazak INTEGREX i-100H S

The machine is equipped with the latest Mazatrol SmoothAi control, fitted as standard. The ease of conversational program creation in Mazatrol mode is ensured by the intuitive layout of auxiliary functions, supported by graphical and, above all, clear prompts and comments.

TOOL HOLDERS SHOWN IN THE PHOTOS ARE INCLUDED IN THE PRICE.

STANDARD TECHNICAL SPECIFICATION

Working area
Main spindle chuck size 6"
Second spindle chuck size 6"
Max. turning length 600 mm
Standard machining diameter (from upper head) 600 mm
Standard machining diameter (from lower head) 400 mm
Bar machining capacity in main spindle 51 mm
Bar machining capacity in sub-spindle 51 mm

Main spindle
Maximum spindle speed 6,000 rpm
Minimum spindle speed 35 rpm
Through-hole diameter 61 mm
Motor power (40% duty) 11.0 kW
Motor power (continuous) 7.5 kW
Max. torque (15% duty) 184 Nm
Max. torque (25% duty) 161 Nm
Max. torque (40% duty) 143 Nm
Maximum torque (continuous operation) 105 Nm

Second spindle
Maximum spindle speed 6,000 rpm
Minimum spindle speed 35 rpm
Through-hole diameter 61 mm
Motor power (40% duty) 11.0 kW
Motor power (continuous) 7.5 kW
Max. torque (15% duty) 184 Nm
Max. torque (40% duty) 143 Nm
Maximum torque (continuous operation) 105 Nm

Milling head
Type Single spindle with automatic tool changer
Tool holder HSK-A63 / HSK-T63
Tool size (external diameter machining) 25 mm
Tool size (internal diameter machining) 40 mm
Tool size (max. milling tool diameter) 130 mm
Tool size (max. milling tool length) 300 mm
Motor power (40% duty) 24.0 kW
Motor power (continuous operation) 14.0 kW
Max. torque (15% duty) 59.7 Nm
Torque (40% duty) 57.3 Nm
Torque (continuous operation) 46.1 Nm
Max. milling spindle speed 20,000 rpm
Min. milling spindle speed 35 rpm

Feed axes
Rapid traverse X 48 m/min
Rapid traverse Z 40 m/min
Rapid traverse Y 40 m/min
Rapid feed rate B 44.4 min⁻¹
Rapid traverse W 30 m/min
Travel X 535 mm
535 mm (+485 mm / -50 mm)
Travel Z 900 mm
Travel Y 210 mm
B-axis travel range 240° (-30° ~ +210°)
Travel W 900 mm

0850U INTEGREX I-100H S 850U
MR406 Milling spindle 20,000 rpm
SI098 Sub-spindle synchronization
AS080 Overload detection system
CS503 Through-spindle coolant 15 bar / flushing
CS664 Preparation for extraction unit (Gx500)
MB255 B-axis measuring probe (RMP60)
MB650 Calibration sphere + magnetic base
MB624 Smooth Set And Inspect (Multi-Tasking)
CV041 Side chip conveyor (hinged belt)
TE810 Preparation for Multi&Flash system
NO056 Y-1 MAZAK API
NO059 MTConnect adapter
NO066 Smooth synchronous tapping (with milling spindle)
NO072 Automatic peck drilling cycle with load monitoring
NO116 Smooth 5-axis control (EIA/ISO)
Tjdexzk Swopfx Ah Dsf
NO123 Tool radius compensation in 5-axis machining
NO134 Simultaneous 5-axis machining on the second spindle
NO442 Slope Constant (G00 motion optimization)
NO482 Thread re-entry
NO599 Cylindrical (G07) and polar (G12) interpolation