Milling machining centers - vertical

MAZAK VCN 510 C

x-travel 1050 mm
y-travel 510 mm
z-travel 510 mm
control Fusion 640 M Nexus
spindle taper DIN 69871/SK40
Feed speed 8000 mm/min.
turning speed range 35 - 12.000 U/min
rapid travel x/y/z 36 m/min
distance spindle /table max. 660 mm
distance spindle /table min. 150 mm
no. of tools in the magazine 30 Stück
tool taper CAT 40
Tool diameter 80 mm
wotkpiece diameter with 2 vacant positions max. 125 mm
max. tool weight 8 kg
max. tool length 350 mm
table length 1300 mm
table width 550 mm
number of T-slots 3
T-slot - width 18 mm
T-slot - distance 100 mm
max. table load 1200 kg
table height over floor 850 mm
coolant tank 250 l
Gijdpfx Aexp Rywedwjp
coolant pump 4,5 bar
internal coolant system feed 15 bar
coolant capacity 271 l/min
required air pressure 700 l/min
spindle drive 18,5
connected load frequency 400 V
connected load 36,6 kVA
frequency 50 Hz
Needed pneumatic pressure 5 (bei 200 l/min) bar
weight of the machine ca. 6,9 t
dimensions of the machine ca. 2,90 x 2,84 x 2,81 m
Including special accessories:
-Cooling through the spindle (15 bar)
-Chip conveyor, hinged belt on the left side
-Torque-dependent drilling cycle (Mazatrol)
-Automatic determination of drilling depth increments after torque detection.
preferably in combination with HSS tool)
-Interface set Contents:
- Interface for keyboard
- Interface for mouse
- Interface for printer
Retrofitting not possible
Machine color gray / black
-CNC Performance Option Package contents:
- Shared variables (600 pairs)
- MAZAK Tornado thread tapping (EIA/ISO)
- Synchronous thread cutting
- EIA/ISO input function
- EIA/ISO special function
Spiral interpolation (G02.1, G03.1),
3D tool correction (G40-G42)
Scaling (G50, G51) etc.
- EIA/ISO, Constant feed (G93)
When using this function,
the feed rate remains constant
for straight and curved combinations on the contour.
- EIA/ISO tool length measurement (G37)
- EIA/ISO, programme unit stop function
Programme sequence is automatically stopped at a specified
programme unit.
- MAZACC-2D (Mazatrol & EIA/ISO)
Precision control function for precise vector interpolation and
optimal acceleration and deceleration at edges and radii.
This enables improved two-dimensional
shape accuracy.
- Additional workpiece coordinate
system (G54.1 P1 - 48) 48 pairs
- Spiral machining function (G33) for boring head machining
(e.g. with d'Andrea tool)

- Used machine without warranty -
- All dimensions, weight and performance data are non-binding