CNC turning and milling center

Bumotec S191 FTL-R

Travel range
Z = 400 mm
Y = 200 mm
X = 410 mm
Power / thrust force
Z-Y 2.5 kW / 550 daN
(linear motor option = 7.2 kW / 350 daN)
X 4.8 kW / > 550 daN

X-Y-Z Travel speed 40 m/min
(linear motor option = 50 m/min)
X-Y-Z-W Acceleration 8 m/s2 / 0.8 g
(linear motor option = 10.4 m/s2 / 1.1 g)
X-Y-Z-W Resolution 0.0001 mm

MAIN SPINDLE + C1

Power 7.5 kW
Torque / peak 22 / 28 Nm
Measuring system direct
Resolution 0.0001°
Accuracy 0.001°
Bar passage Ø 32 mm
Turning spindle speed 72,000°/min
Turning clamping force 4,900 N at 6 bar

AXIS B (TILT AXIS OF TOOL HOLDER SPINDLE)
Power 4.3 kW
Torque / peak 119 / 226 Nm
Angular travel -25° / +115°
Measuring system direct
Resolution 0.0001°
Accuracy 0.001°
Rotational speed 36,000°/min
Supporting torque 200 Nm

TOOL HOLDER SPINDLE
Power 5 kW
Torque 6 to 800 min-1
Max. speed 30,000 min-1
Clamping force of the tool holder 2,000 N
Blocking torque mechanical blocking via straight-tooth gearing
Tool shank taper HSK 40 (A or E)
Tool clamping power 1000 daN

TOOL CHANGER
Number of stations 30 (for HSK 40)
CNC control Fanuc 30i/31i type
Dsdpfx Aeyf Angomnjkn

Y-axis (transverse axis)
Travel 200 mm
Power 4.8 kW
Feed power 240 daN
Resolution 0.0001 mm
Max. rapid traverse G0 50 m/min
Max. feedrate G1 20 m/min
Measuring system glass scale

Z-axis (longitudinal axis)
Travel 400 mm
Power 7.2 kW
Feed power 360 daN
Resolution 0.0001 mm
Max. rapid traverse G0 50 m/min
Max. feedrate G1 20 m/min
Measuring system glass scale

Includes coolant unit 8 kW
and integration of an emergency stop system.

Inventory no. 2220114, machine comprising:

CONTROL
Fanuc 30i/31i, with 14’’ screen

LINEAR MOTOR FEED OPTION
for Y and Z axes

TURNING-MILLING FUNCTION
with integration of an indexing system (8 positions) on the tool holder spindle,
transformation of the tool magazine for HSK40-A tool holders,
increase of the spindle speed to 5500 min-1

4-POSITION PART RECOVERY UNIT “PRM” FOR MACHINING THE 6TH FACE:
In idle state, the unit is located protected under the main C1 spindle.
The recovery unit moves on the W-axis, which is parallel to the C-axis.
Max. speed W-axis: 40 m/min.
Travel on W-axis: 310 mm.
With
2 vices – power at 5 bar: 3500 N
1 tailstock

INCREASED SPINDLE PASSAGE
increase from 1 to 50 mm (main spindle)

TOOL MEASUREMENT DEVICE “RENISHAW” T27
Measurement of the length of the turning tool.
Routine detection by M-code.
Automatic tool breakage monitoring.

TOOL MAGAZINE EXTENSION
Increase in the number of tools from 30 to 60 stations
COOLANT THROUGH THE SPINDLE
100 bar, 25 L/min, 400 L tank

ADAPTATION AND PREPARATION OF HP THROUGH THE MILLING SPINDLE
Mechanical and electrical integration of the turning clutch.

PART UNLOADING CONVEYOR
Output to the left of the machine

PAPER BAND FILTER SYSTEM

CLAMPING SYSTEM FOR F-48 CLAMPS

ADAPTATION FOR W-20 CLAMPS

PREPARATION FOR INTEGRATION OF A BAR FEEDER

Subject to errors and omissions, the technical specifications are provided without commitment.

Огласот е автоматски преведен. Можно е да има грешки во преводот.